Ryobi P430 Manuel de l'opérateur télécharger pdf (Page 5)

5 – English

WARNING:

Do not allow familiarity with products to make you care-

less. Remember that a careless fraction of a second is

sufficient to inflict severe injury.

WARNING:

Always remove battery pack from the tool when you are

assembling parts, making adjustments, cleaning, or when

not in use. Removing battery pack will prevent accidental

starting that could cause serious personal injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes, resulting in possible

serious injury.

APPLICATIONS

You may use this tool for the purposes listed below:

Polishing and buffing cars, boats, RVs, personal watercraft,

motorcycles, hardwood floors, and large furniture

TURNING THE BUFFER / POLISHER ON/OFF

See Figure 1, page 8.



To start the buffer/polisher, place the power switch in the

ON ( l ) position.



To stop the buffer/polisher, place the power switch in

the OFF ( O ) position.

The tool’s rotating base moves in random orbital motion.

The orbit diameter is 3/8 in.

WARNING:

Battery tools are always in operating condition. Therefore,

switch should always be in the OFF ( O ) position when

not in use or carrying at your side, when installing or re-

moving the battery pack, and when installing or removing

accessories.

TO INSTALL / REMOVE BATTERY PACK

See Figure 2, page 8.

 To install: Make sure the power switch is in the OFF ( O )

position.

 Place the battery pack in the tool.

 Make sure the latches on each side of the battery pack

snap into place and the battery pack is secured in the

tool before beginning operation.

 To remove: Turn the switch off and depress the latches.

PREPARE THE SURFACE

For best results, the surface should be clean and dry. Most

high-gloss surfaces can be cleaned with a mild soap and

water solution. For removal of stubborn dirt such as road

tar, grease, and bug stains, you can use a mild ammonia

solution such as that used in glass cleaners. Before using

any cleaning product, check the label for recommended

applications and follow the directions for use.

Never apply cleaner directly onto surface to be polished.

Apply to a clean cloth then use the cloth to clean the surface.

Do not use any type of abrasive cleanser as it may damage

or scratch the surface.

ASSEMBLY

WARNING:

Do not use this product if it is not completely assembled

or if any parts appear to be missing or damaged. Use of

a product that is not properly and completely assembled

or with damaged or missing parts could result in serious

personal injury.

WARNING:

Do not attempt to modify this product or create acces-

sories not recommended for use with this product. Any

such alteration or modification is misuse and could result

in a hazardous condition leading to possible serious

personal injury.

If any parts are damaged or missing, please call 1-800-525-2579 for assistance.

OPERATION

1 2 3 4 5 6 7 8 9 10 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi P430 Manuel de l'opérateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Ponceuses électriques Ryobi P430