Ryobi csb140lz Manuel d'utilisateur télécharger pdf (Page 13)

OPERATION

WARNING:

Do not allow familiarity with tools to make you careless.

Remember that a careless fraction of a second is suf-

ficient to inflict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side

shields when operating power tools. Failure to do so

could result in objects being thrown into your eyes re-

sulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not recom-

mended by the manufacturer of this tool. The use of at-

tachments or accessories not recommended can result

in serious personal injury.

APPLICATIONS

You may use this tool for the purposes listed below:

n Cross Cutting/Rip Cutting

n Bevel Cutting

n Pocket Cutting

Fig. 7

Fig. 8

Fig. 9

Fig. 10

INCORRECT

SUPPORT

CORRECT

SUPPORT

KICKBACK - BLADE SET TOO DEEP

CORRECT BLADE DEPTH SETTING = BLADE EXPOSED 1/4 in.

(6.35 mm) OR LESS ON UNDERSIDE OF WORKPIECE

KICKBACK

See Figures 7 - 10.

Kickback occurs when the blade stalls rapidly and the saw

is driven back towards you. Blade stalling is caused by any

action which pinches the blade in the wood.

DANGER:

Release switch immediately if blade binds or saw stalls.

Kickback could cause you to lose control of the saw. Loss

of control can lead to serious injury.

To guard against kickback, avoid dangerous practices such

as the following.

n Setting blade depth incorrectly.

n Sawing into knots or nails in workpiece.

n Twisting the blade while making a cut.

n Making a cut with a dull, gummed up, or improperly set

blade.

n Supporting the workpiece incorrectly.

n Forcing a cut.

n Cutting warped or wet lumber.

n Operating the tool incorrectly or misusing the tool.

To lessen the chance of kickback, follow these safety

practices.

n Keep the blade at the correct depth setting. The depth

setting should not exceed 1/4 in. (6.35 mm) below the

material being cut.

n Inspect the workpiece for knots or nails before cutting.

Never saw into a knot or nail.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi csb140lz Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à moteur Ryobi csb140lz