Ryobi JS550L Manuel d'utilisateur télécharger pdf (Page 13)

WARNING:

To avoid possible serious injury, keep hands and fingers

from between the gear housing and saw blade clamp,

and keep the guard in place.

WARNING:

Excessive side pressure to the blade could result in bro-

ken blades or damage to the material being cut.

STRAIGHT CUT

See Figures 7 - 9.

Your saw is equipped with a lock for locking the scrolling

knob in the forward facing position. This should be locked

for all straight cuts as shown in figure 8. A straight cut can

be made by clamping a piece of wood or straightedge to

the workpiece and guiding the edge of the saw against it.

Make the cut from one direction only. Don't cut halfway and

complete the cut from the opposite end. You can also use

the supplied edge guide as shown in figure 8. Loosen the

thumb screw and insert the end of the edge guide through

the two slots in the base. Measure the distance to cut and

tighten the thumb screw. Place the edge guide on the outside

edge of the workpiece and cut in a straight path.

OPERATION

Fig. 7

Fig. 8

SCROLLING

KNOB LOCK

EDGE GUIDE

Fig. 9

USING THE LASER GUIDE

See Figure 9.

WARNING:

Do not stare into the laser beam or turn the laser on

when the tool is not in use. Failure to do so could result

in possible serious personal injury.The laser unit comes

from the factory already installed and aligned. If the laser

becomes misaligned after time refer to the "Adjustments"

section.

The jig saw is equipped with a laser guide to project a red

line to show the cut path.

n Pull the switch trigger slightly to engage the laser

guide.

n The laser guide will turn on before the jig saw and con-

tinue to stay on for the cutting operation.

n The laser guide will turn off when the switch trigger is

released.

LASER GUIDE

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Ryobi JS550L Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à moteur Ryobi JS550L