Ryobi P521 Manuel d'utilisateur télécharger pdf (Page 11)

11 - English

WARNING:

Use of controls or adjustments or performance of

procedures other than those specified herein could result

in hazardous radiation exposure.

ADJUSTING THE LASER

See Figure 13, page 14.

The laser can be realigned by adjusting the two screws located

in the front of the saw. The top screw moves the laser beam

laterally from left to right. The bottom screw moves the laser

beam in a rotational direction.

ADJUSTMENTS

NOTE: Draw a pencil line on scrap workpiece parallel to the

long edge of the base as a straight line guide to aid in the

adjusting process.

 Remove the blade from the saw.

 Turn laser on.

 Rest base of saw on scrap workpiece.

 Adjust screws as necessary.

 Since blade thicknesses vary, always make a trial cut in

scrap workpiece to ensure an accurate cut.

 Check for proper alignment.

 Repeat as necessary until laser is aligned.

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts.

Use of any other parts can create a hazard or cause

product damage.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes resulting in possible

serious injury.

WARNING:

To avoid serious personal injury, always remove the

battery pack from the product when cleaning or

performing any maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use. Use

clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken or

destroy plastic which can result in serious personal injury.

BATTERY PACK REMOVAL AND PREPARATION

FOR RECYCLING

WARNING:

Upon removal, cover the battery pack’s terminals with

heavy-duty adhesive tape. Do not attempt to destroy or

disassemble battery pack or remove any of its compo-

nents. Lithium-ion and nickel-cadmium batteries must

be recycled or disposed of properly. Also, never touch

both terminals with metal objects and/or body parts as

short circuit may result. Keep away from children. Failure

to comply with these warnings could result in fire and/

or serious injury.

ACCESSORIES

Look for these accessories where you purchased this product or call 1-800-525-2579:

Edge Guide Kit .....................................................................................................................................................4640051

WARNING:

Current attachments and accessories available for use with this product are listed above. Do not use any attachments

or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not

recommended can result in serious personal injury.

NOTE: FIGURES (ILLUSTRATIONS) START ON PAGE 12

AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Ryobi P521 Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à moteur Ryobi P521