Ryobi SC155VS Manuel d'utilisateur télécharger pdf (Page 16)

Page 16

45˚

30˚

15˚

0˚

LOCK OFF POST

See Figure 19.

To prevent unauthorized use of your scroll saw, we suggest

that you disconnect it from the power supply and lock the

knob in the OFF position. A padlock with a 3/16 in. shackle

should be used. When the lock is installed and locked, as

illustrated, the switch is inoperable. Store the padlock key in

another location.

■ To lock saw in the OFF position, install a padlock through

the lock off post beside the knob as illustrated and lock the

padlock. (Padlock is not supplied with the saw.)

WARNING:

For your own safety, always push the knob OFF when

machine is not in use. Also, in the event of a power failure,

push knob OFF. Lock the scroll saw switch OFF with a

padlock. This will prevent the machine from starting up

again when the power comes back on. Failure to heed this

warning can result in serious personal injury.

INTERIOR SCROLL CUTTING

See Figure 20.

■ One of the features of a scroll saw is that it can be used

to make scroll cuts on the interior of a board without

breaking or cutting through the edge or perimeter of the

board.

WARNING:

To avoid possible serious injury from accidental starting,

always turn the switch OFF and remove plug from power

source outlet before removing or replacing the blade.

■ To make interior cuts in a board, remove the scroll saw

blade as explained in the Installing Blades section on

pages 12 – 14.

■ Drill a 1/4 in. hole in the board to be used to make interior

cuts.

■ Place the board on the saw table with the hole in the board

over the access hole in the table.

■ Install blade through hole in board then adjust the hold

down foot and the blade tension. See pages 16 and 17.

■ When finished making the interior scroll cuts, simply

remove the blade from the blade holders as described in

the Installing Blades section, and remove the board

from the table.

OPERATION

Fig. 19

ON/OFF KNOB

PADLOCK

Fig. 20

DRILL HOLE

INTERIOR

CUT

WORKPIECE

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi SC155VS Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à moteur Ryobi SC155VS