Ryobi BT3100-1 Manuel d'utilisateur télécharger pdf (Page 13)

Page 13

Fig. 6

FEATURES

WARNING:

Although some of the illustrations in this manual are

shown with the blade guard removed for clarity, do not

operate the saw without the blade guard unless specifically

instructed to do so.

OPERATING COMPONENTS

The upper portion of the blade projects up through the table,

surrounded by an insert called the throat plate. To cut wood

at a bevel, the blade must be tilted, using the blade adjust-

ment handle, scale, and bevel indicator found on the front of

the cabinet. Inside the cabinet, adjustable positive stops are

provided for 0º and 45º.

The sliding miter table assembly is used for all crosscutting

operations. The miter fence is easily adjusted to cut wood at

an angle by loosening the adjusting clamp, setting the fence

to the miter scale, and retightening the clamp. The sliding

miter table, which rests on a base mounted on the rails, can

be repositioned along the rails for wide work. It can be

reversed so the projecting base is in the back. It can also be

moved from the right side to the left side as needed. With the

miter fence removed the miter table offers additional support

for other operations such as ripping.

Your saw includes a rip fence and an accessory table. The

accessory table can be moved from the right side of the saw

to the left side as needed. The rip fence is used to position

work that will be cut lengthwise. A scale on the front rail

shows the distance between the rip fence and the blade.

The riving knife is a metal device directly behind and above

the blade. It is used to help keep the cut wood from binding

together and causing possible kickback. It is very important

to use the riving knife for all through-sawing operations. The

anti-kickback pawls are toothed plates mounted on the riving

knife. Their teeth point away from the work in case the work

should be pulled back, toward the operator. Then the teeth

dig into the wood to help prevent or reduce the possibility of

kickback.

Your Ryobi BT3100-1 table saw features a receptacle on the

right side of the cabinet that permits use of accessories. Use

only accessories that are listed for use with this tool. When

using a listed accessory, unplug the saw motor cord and use

the receptacle and BT3100-1 main power switch to operate

the accessory.

POWER SWITCH

Your table saw is equipped with a power switch that has a

built-in locking feature. This feature is intended to prevent

unauthorized and possible hazardous use by children and

others.

TO TURN YOUR SAW ON:

1. With the switch key inserted into the switch, lift the switch

button to turn on ( ).

TO TURN YOUR SAW OFF:

1. Press the switch button down to turn off ( ).

TO LOCK YOUR SAW :

1. Press the switch button down.

2. Remove the switch key from the switch and store in a safe,

secure location.

WARNING:

Always remove the switch key when the tool is not in use

and keep it in a safe place. In the event of a power failure,

turn the switch off ( ) and remove the key. This action

will prevent the tool from accidentally starting when power

returns.

WARNING:

ALWAYS make sure your workpiece is not in contact with

the blade before operating the switch to start the tool.

Failure to heed this warning may cause the workpiece to

be kicked back toward the operator and result in serious

personal injury.

WARNING:

To reduce the risk of accidental starting, ALWAYS make

sure the switch is in the off ( ) position before plugging

tool into the power source .

SWITCH

KEY

SWITCH IN LOCKED POSITION

SWITCH

BUTTON

IN OFF

POSITION

SWITCH

BUTTON

IN ON

POSITION

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Ryobi BT3100-1 Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi BT3100-1