Ryobi HPL50 Manuel de l'opérateur télécharger pdf (Page 9)

WARNING:

Your planer should never be connected to power

supply when you are assembling parts, making

adjustment, changing belts or blades, when

cleaning, or when not in use. Disconnecting your

planer will prevent accidental starting that could

cause serious injury.

CHIP BAG

CHIP

EXHAUST

CHIP

EXHAUST

DIRECTION

DIAL

Fig. 3

CHIP EXHAUST AND COLLECTION

See Figure 3.

CHIP EXHAUST

Your planer is equipped with two chip exhaust ports, an

exhaust direction dial, and a chip bag for the collection

of wood chips in the work area.

The design of your planer allows you to use either chip

exhaust port. Depending on the area in which you are

working, change to the right or left side exhaust port as

needed.

EXHAUST DIRECTION DIAL

To control the direction of wood chips when working in

confined areas, select the left or right outlet by rotating

the exhaust direction dial accordingly.

DIAL OPERATION:

FROM OPERATOR’S POSITION

Dial set to “R” Chips shoot out to operator’s RIGHT.

Dial set to “L” Chips shoot out to Operator’s LEFT.

CHIP BAG

Attach the chip bag to the chip exhaust port by sliding the

collar of the bag into the port. Pull straight out to remove.

The chip bag will fill quickly and must be emptied often.

OPERATION

PREPARING FOR OPERATION

See Figure 4.

For ease of operation your planer has both a front handle

and a rear handle. This provides for two-handed opera-

tion, which is necessary in order to maintain proper con-

trol of your planer and keep both hands clear of the

blades and cutting area. When operating your planer

always use both hands, holding the front handle with

your left hand and the rear handle with your right hand.

In this position, your planer is easier to handle.

Fig. 4

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Commentaires sur ces manuels

Pas de commentaire

Ryobi HPL50 Manuel de l'opérateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi HPL50