Ryobi R181FB1 Manuel de l'opérateur télécharger pdf (Page 12)

Fig. 5

REMOVING/INSERTING CUTTERS

See Figure 5.

Follow these steps to remove or insert cutters.

1. Unplug the router.

WARNING:

Failure to unplug the tool could result in accidental start-

ing causing serious injury.

CAUTION:

To prevent damage to the spindle or spindle lock, al-

ways allow the motor to come to a complete stop before

engaging the spindle lock.

2. Place the router upside down on a workbench in order

to gain easy access to collet nut.

3. Depress the gold spindle lock button.

4. Loosen the collet nut by turning it counterclockwise

with the wrench provided.

WARNING:

If you are changing a cutter immediately after use, be

careful not to touch the cutter or collet with your hands or

fingers. They will get burned because of the heat buildup

from cutting. Always use the wrench provided.

5. Choose one of these options:

■

To remove the cutter:

Remove the cutter from the collet.

■

To insert the cutter:

a) Insert the shank of the cutter until the shank

bottoms out, then pull it out 1/16 in. (1.6 mm) to

allow for expansion when the bit gets hot.

b) Tighten the collet nut securely by turning it

clockwise with the wrench provided.

c) Release the gold spindle lock button.

WARNING:

If the collet nut is not securely tightened, the cutter may

detach during use causing serious personal injury.

WARNING:

Do not use cutters with undersized shanks. Undersized

shanks will not tighten properly and could be thrown

from the tool causing injury.

WARNING:

Do not use cutters that are larger in diameter than the

opening in router subbase. Use of such cutters will

come in contact with the router subbase and damage

both the cutter and router. The use of larger cutters

could also cause possible loss of control or create other

hazardous conditions that could result in serious per-

sonal injury or death.

OPERATION

LOOSEN

TIGHTEN

GOLD

SPINDLE LOCK

BUTTON

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Ryobi R181FB1 Manuel de l'opérateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi R181FB1