Ryobi RJ150V Spécifications télécharger pdf (Page 3)

Page 3

READ ALL INSTRUCTIONS

1. KNOW YOUR POWER TOOL - Read owner's

manual carefully. Learn its applications and limita-

tions as well as the specific potential hazards

related to this tool.

2. GUARD AGAINST ELECTRICAL SHOCK BY

PREVENTING BODY CONTACT WITH

GROUNDED SURFACES. For example: Pipes,

radiators, ranges, refrigerator enclosures.

3. KEEP GUARDS IN PLACE and in working order.

4. KEEP WORK AREA CLEAN. Cluttered areas and

benches invite accidents.

5. AVOID DANGEROUS ENVIRONMENT. Don't use

power tool in damp or wet locations or expose to

rain. Keep work area well lit.

6. KEEP CHILDREN AND VISITORS AWAY. All

visitors should wear safety glasses and be kept a

safe distance from work area. Do not let visitors

contact tool or extension cord.

7. STORE IDLE TOOLS. When not in use, tools

should be stored in a dry, high or locked-up place

- out of the reach of children.

8. DON'T FORCE TOOL. It will do the job better and

safer at the rate for which it was designed.

9. USE RIGHT TOOL. Don't force small tool or at-

tachment to do the job of a heavy duty tool. Don't

use tool for purpose not intended - for example -

Don't use a circular saw for cutting tree limbs or

logs.

10. WEAR PROPER APPAREL. No loose clothing or

jewelry to get caught in moving parts. Rubber

gloves and non-skid footwear are recommended

when working outdoors. Also, wear protective hair

covering to contain long hair and keep it from being

drawn into air vents.

11. ALWAYS WEAR SAFETY GLASSES. Everyday

eyeglasses have only impact-resistant lenses; they

are NOT safety glasses.

12. PROTECT YOUR LUNGS. Wear a face or dust

mask if operation is dusty.

13. PROTECT YOUR HEARING. Wear hearing pro-

tection during extended periods of operation.

14. DON'T ABUSE CORD. Never carry tool by cord or

yank it to disconnect from receptacle. Keep cord

away from heat, oil and sharp edges.

15. SECURE WORK. Use clamps or a vise to hold

work. Both hands are needed to operate the tool.

16. DON'T OVERREACH. Keep proper footing and

balance at all times. Do not use on a ladder or

unstable support.

17. MAINTAIN TOOLS WITH CARE. Keep tools sharp

at all times, and clean for best and safest perfor-

mance. Follow instructions for lubricating and

changing accessories.

18. DISCONNECT TOOLS. When not in use, before

servicing, or when changing attachments, blades,

bits, cutters, etc., all tools should be disconnected

from power supply.

19. REMOVE ADJUSTING KEYS AND WRENCHES.

Form habit of checking to see that keys and

adjusting wrenches are removed from tool before

turning it on.

20. AVOID ACCIDENTAL STARTING. Don't carry

plugged-in tools with finger on switch. Be sure

switch is off when plugging in.

21. MAKE SURE YOUR EXTENSION CORD IS IN

GOOD CONDITION. When using an extension

cord, be sure to use one heavy enough to carry the

current your product will draw. An undersized cord

will cause a drop in line voltage resulting in loss of

power and overheating. A wire gage size (A.W.G.)

of at least 12 is recommended for an extension

cord 100 feet or less in length. A cord exceeding

100 feet is not recommended. If in doubt, use the

next heavier gage. The smaller the gage number,

the heavier the cord.

22. OUTDOOR USE EXTENSION CORDS. When

tool is used outdoors, use only extension cords

intended for use outdoors and so marked.

23. KEEP BLADES CLEAN AND SHARP. Sharp

blades minimize stalling and kickback. Also, keep

blades properly tightened at all times.

24. KEEP HANDS AWAY FROM CUTTING AREA.

Keep hands away from blades. Do not reach

underneath work while blade is cutting. Do not

attempt to remove material while blade is cutting.

25. NEVER USE IN AN EXPLOSIVE ATMOSPHERE.

Normal sparking of the motor could ignite fumes.

26. INSPECT TOOL CORDS PERIODICALLY and if

damaged, have repaired by an authorized service

center. Stay constantly aware of cord location.

27. INSPECT EXTENSION CORDS PERIODICALLY

and replace if damaged.

28. KEEP HANDLES DRY, CLEAN, AND FREE

FROM OIL AND GREASE. Always use a clean

cloth when cleaning. Never use brake fluids, gaso-

line, petroleum-based products or any strong sol-

vents to clean your tool.

1 2 3 4 5 6 7 8 ... 11 12

Commentaires sur ces manuels

Pas de commentaire

Ryobi RJ150V Spécifications Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi RJ150V