Ryobi RY41141 Manuel d'utilisateur télécharger pdf (Page 13)

Page 9 — English

Trimmer should be held at a comfortable position with the

rear handle about hip height.

Cut tall grass from the top down. This will prevent grass

from wrapping around the shaft housing and line head

which may cause damage from overheating.

If grass becomes wrapped around the line head:

Stop the trimmer.

Unplug the string trimmer.

Remove the grass.

WARNING:

Always hold the string trimmer away from the body

keeping clearance between the body and the string

trimmer. Any contact with the string trimmer cutting head

while operating can result in serious personal injury.

ADVANCING LINES

NOTE: The trimmer is equipped with an auto-feed head.

Bumping the head to try to advance the line will damage

trimmer and void warranty.

With the trimmer running, release the switch trigger.

Wait two seconds, and press the switch trigger.

NOTE: The line will extend approximately 1/4 in. with each

stop and start of the switch trigger until the line reaches

the length of the grass deflector blade.

Resume trimming.

ADVANCING THE LINE MANUALLY

See Figure 9.

Disconnect the string trimmer from the power supply, then

push the spool retainer button in while pulling on trimmer

line to manually advance.

LINE CUT-OFF BLADE

See Figure 10.

This trimmer is equipped with a line cut-off blade on the

grass deflector. For best cutting, advance line until they

are trimmed to length by the cut-off blade. Advance line

whenever you hear the motor running faster than normal,

OPERATION

or when trimming efficiency diminishes. This will maintain

best performance and keep trimmer line long enough to

advance properly.

CUTTING TIPS

See Figure 11.

Keep the trimmer tilted toward the area being cut; this is

the best cutting area.

The string trimmer cuts when passing the unit from right

to left. This will avoid throwing debris at the operator.

Avoid cutting in the dangerous area.

Use the tip of the line to do the cutting; do not force line

head into uncut grass.

Wire and picket fences cause extra line wear, even break-

age. Stone and brick walls, curbs, and wood may wear

trimmer line rapidly.

Avoid trees and shrubs. Tree bark, wood moldings, siding,

and fence posts can easily be damaged by the trimmer

line.

TELESCOPING BOOM

See Figure 12.

The boom can be extended or shortened for ease of use.

Unplug the string trimmer.

Unscrew telescoping boom coupler and slide to desired

position.

Tighten boom coupler.

EDGING

See Figures 13 - 14.

Unplug the string trimmer.

Step down on the foot pedal.

Rotate the trimmer head counterclockwise placing the

tool in the edger position.

WARNING:

Always hold the string trimmer away from the body keep-

ing clearance between the body and the string trimmer.

Any contact with the string trimmer cutting head while

operating can result in serious personal injury.

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts.

Use of any other parts may create a hazard or cause

product damage.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes, resulting in possible

serious injury.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY41141 Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi RY41141