Ryobi AG700 Manuel d'utilisateur télécharger pdf (Page 13)

Fig. 3

lock-off/

lock-on

BuTTon

SWiTcH

TriGGer

OPERATION

LOCK-OFF/LOCK-ON BUTTON

See Figure 3.

The lock-off/lock-on button prevents accidental starting of the

grinder, and also allows the grinder to be locked-on, which

is convenient for continuous grinding/sanding/polishing for

extended periods of time.

To lock-on:

 Push in and hold the lock-off/lock-on button, located on

the side of the handle.

 Depress the switch trigger.

 Push in further on the lock-off/lock-on button.

 Release the switch trigger.

 Release the lock-on button and the tool will continue

running.

 To release the lock, depress and release the switch

trigger.

If the lock-on feature is engaged during use and the

tool becomes disconnected from the power supply,

disengage the lock-on feature immediately.

CAUTION:

Never cover air vents. They must always be open for

proper motor cooling.

90˚ ROTATING HANDLE

See Figure 4.

The handle on the tool can rotate 90˚ to the left or right for

ease of operation.

To adjust the handle:

 Unplug the tool.

 Press and hold handle lock button.

Rotate the handle to the desired position and release the

handle lock button.

WARNING:

Make sure the handle lock button on the handle clicks

and locks into place when changing handle positions.

Failure to heed this warning could result in serious per-

sonal injury.

VARIABLE SPEED DIAL

See Figure 5.

The variable speed dial allows you to optimize the speed of

the tool based on the desired application. Refer to the chart

at right for proper speed selection.

Fig. 4

puSH

HAndle lock BuTTon

To roTATe HAndle

Fig. 5

vAriABle

Speed diAl

APPLICATION SPEED SETTING

Polishing 1-2

Sanding 3-5

Grinding 6

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Commentaires sur ces manuels

Pas de commentaire

Ryobi AG700 Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Machines spéciales Ryobi AG700