Ryobi HP472 Manuel d'utilisateur télécharger pdf (Page 14)

14 15

SWITCH

See Figure 7.

To turn the drill ON, depress the switch trigger. To turn it

OFF, release the switch trigger.

The drill has a two-speed feature in the switch. Depress

the switch trigger halfway for driving screws at low speed.

Depress the switch trigger all the way for normal drilling.

Release the switch trigger to turn drill OFF.

SWITCH LOCK

See Figure 7.

The switch trigger can be locked in the OFF position. This

feature helps reduce the possibility of accidental starting when

not in use. To lock the switch trigger, place the direction of

rotation selector in the center position.

REVERSIBLE

See Figure 8.

This tool is reversible. The direction of rotation is controlled

by a selector located above the switch trigger. With the drill

held in normal operating position, the direction of rotation

selector should be positioned to the left of the switch for

drilling. The drilling direction is reversed when the selector

is to the right of the switch. When the selector is in center

position, the switch trigger is locked.

CAUTION:

To prevent gear damage, always allow chuck to come

to a complete stop before changing the direction of

rotation.

To stop, release switch trigger and allow the chuck to come

to a complete stop.

KEYLESS CHUCK

See Figure 9.

A keyless chuck has been provided with the drill to allow for

easy installation and removal of bits. As the name implies, you

can hand tighten or release drill bits in the chuck jaws. Grasp

and hold the collar of the chuck with one hand. Rotate the

chuck body with your other hand. The arrows on the chuck

indicate which direction to rotate the chuck body in order to

LOCK (tighten) or UNLOCK (release) the drill bit.

WARNING:

Do not hold the chuck body with one hand and use the

power of the drill to tighten chuck jaws on drill bit. Chuck

body could slip in your hand or your hand could slip and

come in contact with rotating drill bit. This could cause

an accident resulting in serious personal injury.

OPERATION

Fig. 8

Fig. 7

SWITCH

TRIGGER

FORWARD / REVERSE SELECTOR

WITH CENTER LOCK POSITION

REVERSE

FORWARD

SELECTOR

CHUCK

BODY

CHUCK

COLLAR

CHUCK

JAWS

DRILL BIT

RELEASE

(UNLOCK)

GRIP

(TIGHTEN)

Fig. 9

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Ryobi HP472 Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Ryobi HP472