Ryobi MC100L Manuel d'utilisateur télécharger pdf (Page 7)

7 — English

BATTERY PROTECTION FEATURES

Ryobi lithium-ion batteries are designed with features that

protect the lithium-ion cells and maximize battery life.

If the tool stops during use, release the trigger to reset and

resume operation. If the tool still does not work, the battery

needs to be recharged.

TO INSTALL / REMOVE BATTERY PACK

See Figure 2, page 9.

Detach the cap by twisting the arrow toward the UNLOCK

icon.

Insert the battery pack in the direction shown. Make sure

the raised rib on the battery pack aligns with the groove

in the battery port. Press down on the battery pack to be

sure contacts on the battery pack engage properly.

Reattach the cap by placing it over the battery pack and

twisting the arrow to the LOCK icon, making sure the cap

is secure.

To remove the battery pack, twist the cap to open and

remove the battery pack from the battery port.

Do not attempt to use this tool if the battery cap is not

closed and locked.

STARTING AND STOPPING

See Figure 3, page 9.

Grasp the handle with either your left or right hand.

The switch trigger and the lock out button must be

depressed simultaneously to begin blade movement.

WARNING:

Do not place hand between the blades. Placement of

your hand or fingers in this area could result in a shear

point injury.

To stop blade movement, release the switch trigger.

CUTTING TIPS

See Figure 4, page 9.

Do not force the snips through dense material. This can

cause the blades to dull and slow down. If the blades

slow down, reduce the pace.

Use caution when cutting metals or other materials where

cutting could result in jagged or sharp edges.

Only cut materials listed under applications.

OPERATION

WARNING:

Always remove battery pack from your tool when you are

assembling parts, making adjustments, cleaning, or when

not in use. Removing battery pack will prevent accidental

starting that could cause serious personal injury.

WARNING:

Do not allow familiarity with products to make you

careless. Remember that a careless fraction of a second

is sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes, resulting in possible

serious injury.

WARNING:

Do not use any attachments or accessories not

recommended by the manufacturer of this product. The

use of attachments or accessories not recommended

can result in serious personal injury.

APPLICATIONS

You may use this product for the purposes listed below:

Shearing aluminum flashing, metal fencing, carpeting and

wires

Cutting cloths, denims, leathers, plastics, and “clamshell”

type product packaging

WARNING:

Do not cut electrical wire. Contact with a “live” wire will

also make exposed metal parts of the tool “live” and

shock the operator.

WARNING

Battery products are always in operating condition.

Therefore, the switch should always be locked when not

in use or carrying at your side.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi MC100L Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Ryobi MC100L