Ryobi P320 Manuel d'utilisateur télécharger pdf (Page 11)

11 — English

NOTE: ILLUSTRATIONS START ON PAGE 12

AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.

This product has a Three-year Limited Warranty.

For Warranty details go to www.ryobitools.com

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

Work-contacting element does not

depress fully - tool does not operate.

Low nails

Work-contacting element is jammed

Replenish nails

Remove battery and clear debris

Tool operates properly, but fasteners do

not drive fully

Air pressure is too low

Depth of drive isn’t deep enought

Nail is too long for wood hardness

Increase air pressure

Adjust depth of drive

Use nail length that is appropriate for

wood

Tool operates properly, but fasteners are

driven too deep

Air pressure is too high

Depth of drive is too deep

Decrease air pressure

Adjust depth of drive

Tool jams frequently Incorrect nails

Damaged nails

Loose magazine

Dirty magazine

Verify that nails are the correct size

Replace nails

Tighten screws

Clean magazine

Tool stops and LED’s flash rapidly Battery is low or has no charge.

Tool is hot

Recharge battery

Allow tool to cool

Tool has charged battery and LED’s

are slowly flashing or LED’s do not turn

off after approximately ten seconds of

non-use.

Tool has malfunctioned Take tool to nearest authorized repair

center

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Ryobi P320 Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Ryobi P320