Ryobi SA120 Manuel d'utilisateur télécharger pdf (Page 3)

Page 3

GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to

follow all instructions listed below, may result in elec-

tric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

■ Keep your work area clean and well lit. Cluttered

benches and dark areas invite accidents.

■ Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases,

or dust. Power tools create sparks which may ignite the

dust or fumes.

■ Keep bystanders, children, and visitors away while

operating a power tool. Distractions can cause you to

lose control.

ELECTRICAL SAFETY

■ A battery operated tool with integral batteries or a

separate battery pack must be recharged only with

the specified charger for the battery. A charger that

may be suitable for one type of battery may create a risk

of fire when used with another battery.

■ Use battery operated tool only with specifically

designated battery pack. Use of any other batteries may

create a risk of fire.

■ Use battery only with charger listed.

MODEL BATTERY PACK CHARGER

SA960 1311146 1411140

SA120 1311148 1411141

■ Do not abuse the cord. Never use the cord to carry

the charger. Keep cord away from heat, oil, sharp

edges, or moving parts. Replace damaged cords im-

mediately. Damaged cords may create a fire.

PERSONAL SAFETY

■ Stay alert, watch what you are doing and use com-

mon sense when operating a power tool. Do not use

tool while tired or under the influence of drugs, alco-

hol, or medication. A moment of inattention while oper-

ating power tools may result in serious personal injury.

■ Dress properly. Do not wear loose clothing or jew-

elry. Contain long hair. Keep your hair, clothing, and

gloves away from moving parts. Loose clothes, jew-

elry, or long hair can be caught in moving parts.

■ Avoid accidental starting. Be sure switch is in the

locked or off position before inserting battery pack.

Carrying tools with your finger on the switch or inserting

the battery pack into a tool with the switch on invites acci-

dents.

■ Remove adjusting keys or wrenches before turning

the tool on. A wrench or a key that is left attached to a

rotating part of the tool may result in personal injury.

■ Do not overreach. Keep proper footing and balance

at all times. Proper footing and balance enable better

control of the tool in unexpected situations.

■ Use safety equipment. Always wear eye protection.

Dust mask, non-skid safety shoes, hard hat, or hearing

protection must be used for appropriate conditions.

TOOL USE AND CARE

■■

■ Use clamps or other practical way to secure and sup-

port the workpiece to a stable platform. Holding the

work by hand or against your body is unstable and may

lead to loss of control.

■ Do not force tool. Use the correct tool for your appli-

cation. The correct tool will do the job better and safer at

the rate for which it is designed.

■ Do not use tool if switch does not turn it on or off. A

tool that cannot be controlled with the switch is danger-

ous and must be repaired.

■ Disconnect battery pack from tool or place the switch

in the locked or off position before making any ad-

justments, changing accessories, or storing the tool.

Such preventive safety measures reduce the risk of start-

ing the tool accidentally.

■ Store idle tools out of reach of children and other

untrained persons. Tools are dangerous in the hands of

untrained users.

■ When battery pack is not in use, keep it away from

other metal objects like: paper clips, coins, keys, nails,

screws, or other small metal objects that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause sparks, burns, or a

fire.

■ Maintain tools with care. Keep cutting tools sharp

and clean. Properly maintained tools with sharp cutting

edges are less likely to bind and are easier to control.

■ Check for misalignment or binding of moving parts,

breakage of parts, and any other condition that may

affect the tool's operation. If damaged, have the tool

serviced before using. Many accidents are caused by

poorly maintained tools.

■ Use only accessories that are recommended by the

manufacturer for your model. Accessories that may be

suitable for one tool may create a risk of injury when used

on another tool.

■ Keep the tool and its handle dry, clean and free from

oil and grease. Always use a clean cloth when cleaning.

Never use brake fluids, gasoline, petroleum-based prod-

ucts, or any strong solvents to clean your tool. Following

this rule will reduce the risk of loss of control and deterio-

ration of the enclosure plastic.

1 2 3 4 5 6 7 8 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Ryobi SA120 Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Ryobi SA120