Ryobi 4710300 Manuel d'utilisateur télécharger pdf (Page 3)

UNPACKING

INFORMATION

Your miter clamping kit includes a miter clamp and the

connecting hardware necessary to assemble and attach

the miter clamp to the miter fence of your saw.

NOTE: This kit applies downward and inward pressure

to the workpiece. The kit snugly pulls the workpiece

against the miter fence up to a maximum of 1/16 in.

■ Remove the loose parts from the box. Make sure

that all items listed in the loose parts list are in-

cluded.

■ Inspect all parts carefully to make sure no breakage

or damage occurred during shipping.

■ If any parts are damaged or missing, please call

1-800-525-2579 for assistance.

WARNING:

If any parts are missing do not assemble the kit until

the missing parts are replaced. Failure to do so

could result in serious personal injury.

LOOSE PARTS LIST

1. Post

2. Miter Clamp

3. Knob Bolt #5/16-18 x 1 in.

4. Spacer

5. T-Nut 5/16 in.

TOOLS NEEDED

You need an adjustable wrench to assemble this accessory.

Fig. 1

KNOB BOLT

MITER CLAMP

POST

SPACER

5/16 in. T-NUT

1 2 3 4 5 6 7 8

Pas de commentaire

Ryobi 4710300 Manuel d'utilisateur Page 3