Ryobi ELL0002 Manuel d'utilisateur télécharger pdf (Page 9)

8 9

OPERATION

INSTALLING BATTERIES

See Figure 3.

The battery compartment is located on the bottom of the

vacuum base.

�n Squeeze the retaining clip on the battery cover plate to

release.

n Install three AA batteries according to polarity indicators

inside the battery compartment.

n Place the battery cover plate back onto the base and

push down until retaining clip snaps back into locked

position.

TURNING THE VACUUM BASE ON/OFF

See Figure 4.

Press the button located on the right side of the vacuum base

to turn it ON and OFF. Always wait for at least 5 seconds

between stopping and restarting the unit.

USING THE AIRGRIP VACUUM

See Figure 5.

Vacuum grip technology allows the unit to be attached to

most smooth surfaces.

NOTE: The multi-function base is not used when mounting

by vacuum grip.

n Place the unit on the surface you want it secured to and

press against the surface slightly to seal.

n Continue to hold the unit against the surface while press-

ing the on/off button.

n Release the unit when you hear a change in motor

sound.

NOTE: To release the vacuum seal, turn the power to the

vacuum base off. For fast release, press the protrusion on the

side of the AIRgrip seal. Pulling the unit off the wall without

releasing the vacuum could damage the tool.

TURNING THE LASER ON/OFF

See Figure 5.

The laser head has three different positions:

• Travel mode: laser is off, self-leveling is locked, angle

finder is locked.

• Self-leveling mode: laser is on, self-leveling is available,

angle finder is locked.

• Angle-finder mode: laser is on, self-leveling is locked,

angle finder is available.

When the angle indicator dial on the laser head is in the

center, the laser head is in travel mode. For self-leveling

mode, turn the dial to the right. Turn the dial to the left for

angle-finder mode.

Fig. 3

Fig. 4

Fig. 5

BATTERY

COVER

PLATE

RETAINING CLIP

VACUUM

BASE

ON/OFF

BUTTON

ANGLE INDICATOR DIAL

VACUUM

BASE ON/OFF

BUTTON

SELF-LEVELING

MODE

ANGLE-FINDER

MODE

TRAVEL

MODE

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Commentaires sur ces manuels

Pas de commentaire

Ryobi ELL0002 Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour la vidéo Ryobi ELL0002