Ryobi RY08554 Manuel de l'opérateur télécharger pdf (Page 11)

VAcuum

inleT Door

Door

TAb

INSTALLING THE VACUUM TUBES

See Figures 7 - 8.

WARNING:

Rotating impeller blades can cause severe injury. Always

stop the engine before opening the vacuum door or

installing/changing tubes. Do not put hands or any other

object into the vacuum tubes while they are installed on

the unit.

NOTE: This vacuum/blower is equipped with a vacuum door

interlock. If vacuum door is open and vacuum tubes are not

installed, engine will not start.

To install the vacuum tubes:



Secure the upper and lower vacuum tubes together by

aligning the raised locking tabs with the raised slots.



Tap tube assembly on ground until the screw holes in

lower tube are in the raised slot of the upper tube. Secure

with supplied screws.



Depress door tab and open vacuum inlet door.



Align tabs on housing with tube assembly. Insert tube

assembly into vacuum opening. Twist clockwise and lock

the upper vacuum tube into the blower housing.



Tighten screw on upper vacuum tube to secure to blower

housing.

To remove the vacuum tubes:



Twist to loosen the upper vacuum tube by turning

counterclockwise.



Remove the vacuum tube assembly from the blower

housing.



Close the vacuum inlet cover door securely.

Fig. 8

Fig. 7

VAcuum

openinG

VAcuum Tube

ASSemblY

upper

VAcuum Tube

lockinG TAb

ASSEMBLY

VAcuum

inleT Door

lockinG TAb

VAcuum bAG

ASSemblY

VAcuum

Door hinGe

ScreW

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY08554 Manuel de l'opérateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Ventilateurs et séchoirs à air Ryobi RY08554