Ryobi P2004 Manuel de l'opérateur télécharger pdf (Page 12)

10 — English

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

Line will not advance when using

the auto-feed head

Line is welded to itself.

Not enough line on spool.

Line is worn too short.

Line is tangled on spool.

Lubricate with silicone spray.

Install more line. Refer to Line Replacement

earlier in this manual.

Pull line while pressing button.

Remove line from spool and rewind. Refer to

Line Replacement earlier in this manual.

Grass wraps around boom

housing and string head

Cutting tall grass at ground

level.

Cut tall grass from the top down to prevent

wrapping.

Motor fails to start when switch

trigger is depressed.

Battery is not secure.

Battery is not charged.

To secure the battery pack, make sure the

latches on each side of the battery pack snap

into place.

Charge the battery pack according to the

instructions included with your model.

CALL US FIRST

For any questions about operating or maintaining your product,

call the Ryobi® Help Line!

Your product has been fully tested prior to shipment to ensure

your complete satisfaction.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 33 34

Pas de commentaire

Ryobi P2004 Manuel de l'opérateur Page 12