Ryobi JS481L Manuel de l'opérateur télécharger pdf (Page 6)

6 — English

FEATURES

PRODUCT SPECIFICATIONS

Input .........................120 Volts, AC Only, 60 Hz, 4.8 Amps

No Load Speed ..........................................600-3,000/min.

Stroke Length ........................................................... 3/4 in.

Orbital Settings ................................................................. 4

Net Weight ...............................................................4.4 lbs.

ASSEMBLY

UNPACKING

This product requires assembly.

 Carefully remove the product and any accessories from

the box. Make sure that all items listed in the packing list

are included.

WARNING:

Do not use this product if any parts on the Packing List

are already assembled to your product when you unpack

it. Parts on this list are not assembled to the product by

the manufacturer and require customer installation. Use

of a product that may have been improperly assembled

could result in serious personal injury.

 Inspect the product carefully to make sure no breakage

or damage occurred during shipping.

 Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the product.

 If any parts are damaged or missing, please call

1-800-525-2579 for assistance.

PACKING LIST

Jig Saw

Wood Cutting Blade

Operator’s Manual

WARNING:

If any parts are damaged or missing do not operate this

tool until the parts are replaced. Use of this product

with damaged or missing parts could result in serious

personal injury.

WARNING:

Do not attempt to modify this product or create acces-

sories not recommended for use with this product. Any

such alteration or modification is misuse and could result

in a hazardous condition leading to possible serious

personal injury.

WARNING:

Do not connect to power supply until assembly is com-

plete. Failure to comply could result in accidental starting

and possible serious personal injury.

INSTALLING BLADE

See Figure 1, page 11.

NOTE: The jig saw is designed for T-shank blades only.

To install blade:

 Unplug the saw.

 Rotate the rapid change blade clamp so that the slot in

the blade clamp is aligned with the slot in the blade sup-

port roller.

 Holding the blade clamp in place, insert the saw blade

as far as possible into the slot in the blade clamp body

and blade support roller.

 Check to make sure the back of the saw blade is centered

in the slot of the blade support roller and blade clamp.

 Release the blade clamp. Make sure the blade is securely

in place.

NOTE: Check that the blade is inserted fully and com-

pletely secured. Blade will lock into position when cor-

rectly installed. Do not use the tool if the blade is not

installed correctly.

To remove blade:

 Unplug the saw.

 Allow blade to cool.

 Rotate the rapid change blade clamp so that the slot in

the blade clamp is aligned with the slot in the blade sup-

port roller.

 Remove the blade.

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Ryobi JS481L Manuel de l'opérateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi JS481L