Ryobi RE1802M Manuel d'utilisateur télécharger pdf (Page 11)

OPERATION

Fig. 6

LOCKING

KNOB

GOLD

SPINDLE

LOCK

BUTTON

15/32

7/16

Fig. 7

DEPTH

ADJUSTMENT

RING

TAB INSIDE THE

BASE

15/32

1/32

INDICATOR

POINT

INDICATOR

ARROW

DEPTH

ADJUSTMENT

RING

GROOVE IN

MOTOR

HOUSING

TO SWITCH FROM PLUNGE BASE TO FIXED BASE OR

D-HANDLE BASE

See Figures 6 and 7.

TO REMOVE THE PLUNGE BASE

1. Unplug the router.

WARNING:

Failure to unplug the tool could result in accidental

starting causing serious injury.

2. Place the router on a flat surface.

3. Loosen the locking knob.

4. Depress and hold the gold spindle lock button. The

gold spindle lock button will not depress fully unless it

is in line with the hole in the collet.

5. If the gold spindle lock button does not depress fully,

turn the collet nut while depressing the gold spindle

lock button. As they align, the gold spindle lock button

will depress fully.

6. Remove the motor housing from the plunge base.

NOTE: As the motor is being removed from the base,

the gold spindle lock button has to be depressed until

it clears the opening beneath the base.

TO INSTALL THE FIXED OR D-HANDLE BASE

1. Unplug the router.

2. Place the fixed or D-handle base on a flat surface.

3. Loosen the locking arm.

4. Align the indicator arrow on the depth adjustment ring

with the indicator point on the base.

5. Align the groove in the motor housing with the tab

inside of the base. NOTE: The tab is located on the

inside of the base in line with the handle.

6. Depress and hold the gold spindle lock button on the

motor.

7. Slide the motor housing into the base.

8. Turn the depth adjusting ring counterclockwise until

the gold spindle lock snaps out as it clears the rear

window, just below the locking arm.

9. Tighten the locking arm.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi RE1802M Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs Ryobi RE1802M