Ryobi BGH615 Manuel d'utilisateur télécharger pdf (Page 3)

Page 3

RULES FOR SAFE OPERATION

Safe operation of this power tool requires that you read and

understand this operator's manual and all labels affixed to

the tool. Safety is a combination of common sense, staying

alert, and knowing how your bench grinder works.

READ ALL INSTRUCTIONS

n KNOW YOUR POWER TOOL. Read the operator's

manual carefully. Learn the applications and limitations

as well as specific potential hazards related to this tool.

n GUARD AGAINST ELECTRICAL SHOCK by prevent-

ing body contact with grounded surfaces. For example:

pipes, radiators, ranges, refrigerator enclosures.

n KEEP GUARDS IN PLACE and in working order. Never

operate the tool with any guard or cover removed. Make

sure all guards are operating properly before each use.

n REMOVE ADJUSTING KEYS AND WRENCHES. Form

habit of checking to see keys and adjusting wrenches are

removed from tool before turning it on.

n KEEP THE WORK AREA CLEAN. Cluttered work areas

and work benches invite accidents.

n AVOID DANGEROUS ENVIRONMENTS. Do not use

power tools near gasoline or other flammable liquids,

in damp or wet locations or expose them to rain. Keep

work area well lighted.

n KEEP CHILDREN AND VISITORS AWAY. All visitors

should wear safety glasses and be kept a safe distance

from work area.

n MAKE WORKSHOP CHILDPROOF with padlocks,

master switches, or by removing starter keys.

n DON’T FORCE THE TOOL. It will do the job better and

safer at the rate for which it was designed.

n USE THE RIGHT TOOL. Do not force the tool or attach-

ment to do a job for which it was not designed.

n USE THE PROPER EXTENSION CORD. Make sure

your extension cord is in good condition. When using

an extension cord, be sure to use one heavy enough to

carry the current your product will draw. An undersized

cord will cause a drop in line voltage resulting in loss of

power and overheating. A wire gage size (A.W.G.) of at

least 16 is recommended for an extension cord 25 feet

or less in length. If in doubt, use the next heavier gage.

The smaller the gage number, the heavier the cord.

n INSPECT EXTENSION CORDS PERIODICALLY and

replace if damaged.

n WEAR PROPER APPAREL. Do not wear loose clothing,

neckties, or jewelry that can get caught in the tool’s

moving parts and cause personal injury. Nonslip footwear

is recommended when working outdoors. Wear protective

hair covering to contain long hair.

n ALWAYS WEAR SAFETY GLASSES WITH SIDE

SHIELDS. Everyday eyeglasses have only impact-

resistant lenses; they are NOT safety glasses.

n PROTECT YOUR LUNGS. Wear a face or dust mask if

the cutting operation is dusty.

n PROTECT YOUR HEARING. Wear hearing protection

during extended periods of operation.

n DON’T ABUSE CORD. Never carry tool by the cord or

yank it to disconnect from receptacle. Keep cord from

heat, oil, and sharp edges.

n DO NOT OVERREACH. Keep proper footing and balance

at all times.

n MAINTAIN TOOLS WITH CARE. Keep tools sharp and

clean for best and safest performance. Follow instructions

for lubricating and changing accessories.

n NEVER LEAVE TOOL RUNNING UNATTENDED. TURN

POWER OFF. Disconnect all tools when not in use, before

servicing, or when changing attachments, wheels, etc.

n AVOID ACCIDENTAL STARTING. Be sure switch is off

when plugging in.

n USE RECOMMENDED ACCESSORIES. The use of

improper accessories may cause risk of injury.

n USE ONLY GRINDING WHEELS that comply with ANSI

B7.1 and rated greater than 3600 RPM.

n DO NOT use wheels with incorrect size holes. NEVER

use wheel washers or wheel screws that are defective

or incorrect and NEVER touch grinding wheel or other

moving parts.

n NEVER STAND ON TOOL. Serious injury could occur if

the tool is tipped or if the wheel is unintentionally con-

tacted.

n DIRECTION OF FEED. Be aware of wheel rotation direc-

tion; never grind without the workrest being properly set.

NEVER grind more than one workpiece at a time.

WARNING: Wheel coasts after turn off.

n CHECK DAMAGED PARTS. Before further use of the

tool, a guard or other part that is damaged should be

carefully checked to determine that it will operate properly

and perform its intended function. Check for alignment

of moving parts, binding of moving parts, breakage of

parts, mounting and any other conditions that may affect

its operation. A guard or other part that is damaged must

be properly repaired or replaced by an authorized service

center to avoid risk of personal injury.

n KEEP TOOL DRY, CLEAN, AND FREE FROM OIL AND

GREASE. Always use a clean cloth when cleaning. Never

use brake fluids, gasoline, petroleum-based products, or

any solvents to clean tool.

n INSPECT TOOL CORDS AND EXTENSION CORDS

PERIODICALLY and, if damaged, have repaired by a

qualified service technician. Stay constantly aware of

cord location and keep it well away from the rotating

wheel.

n NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal

sparking of the motor or sparking from grinding metal could

ignite fumes.

1 2 3 4 5 6 7 8 ... 17 18

Commentaires sur ces manuels

Pas de commentaire

Ryobi BGH615 Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Ryobi BGH615