Ryobi RY30931 Manuel d'utilisateur télécharger pdf (Page 13)

ATTACHING THE GRASS DEFLECTOR

WARNING:

The line cutting blade on the grass deflector is sharp.

Avoid contact with the blade. Failure to avoid contact

can result in serious personal injury.

TO ATTACH THE CURVED SHAFT GRASS

DEFLECTOR - CS30

See Figure 6.

 Remove hex screw, flat washer, and wing nut from grass

deflector.

 Press the grass deflector onto the bottom of the curved

shaft as shown.

 Insert the hex screw through the grass deflector and the

bracket on the curved shaft.

 Place the flat washer on the hex screw.

 Place the wing nut on the hex screw and tighten

securely.

TO ATTACH THE STRAIGHT SHAFT GRASS

DEFLECTOR - SS30

See Figure 7.

 Remove the wing screw from the grass deflector.

 Insert the tab on the mounting bracket in the slot on the

grass deflector.

 Align the screw hole in the mounting bracket with the

screw hole in the grass deflector.

 Insert the wing screw through the mounting bracket and

into the grass deflector.

 Tighten the screw securely.

ATTACHING THE BRUSHCUTTER GUARD -

BC30

See Figure 8.

The guard is shipped installed on these brushcutter

models. Instructions have been included for reference when

changing from string trimmer operation back to brushcutter

operation.

 With the string head removed, place the brushcutter guard

on the gear head as shown.

 Install the three hex head screws from bottom through

the guard and into the gear head.

 Tighten the screws securely and torque to 40-50 in.lb.

minimum.

ASSEMBLY

GRASS

DEFLECTOR

BRACKET

HEX

SCREW

WING NUT

FLAT

WASHER

Fig. 7

Fig. 8

WING

SCREW

STRAIGHT

SHAFT GRASS

DEFLECTOR

TAB

SLOT

GEAR

HEAD

HEX HEAD

SCREW

BRUSHCUTTER GUARD

Fig. 6

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY30931 Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Ryobi RY30931