Ryobi BS903 Manuel d'utilisateur télécharger pdf (Page 20)

ADJUSTMENTS

Fig. 19

ADJUSTING BLADE GUIDE ASSEMBLY

See Figures 18 and 19.

To prevent the blade from twisting or breaking, the blade

guide assembly should always be set approximately 1/8 in.

(3 mm) above the workpiece.

 Turn the lock knob counterclockwise to unlock the blade

guide assembly.

 As a guide, use a scrap piece of the same wood you are

about to cut to set the height of the blade guide assembly.

Adjust the blade guide assembly by turning the blade

guide knob.

 Lock blade guide assembly in place by turning the lock

knob clockwise.

 Always lock the blade guide assembly in place before

turning on the band saw.

WARNING:

To avoid personal injury, maintain proper adjustment of

blade tension, blade tracking, blade guides, and thrust

bearings.

Fig. 18

BLADE GUIDE

KNOB

LOCK

KNOB

LOCK

UNLOCK

BLADE GUIDE

ASSEMBLY

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

Pas de commentaire

Ryobi BS903 Manuel d'utilisateur Page 20