Ryobi CFS1503K Manuel de l'opérateur télécharger pdf (Page 10)

Sheet/Pad Recommended Use

Heavy scrubbing pad Paint and rust removal

(Part no. CFS1501-36)

Light scrubbing pad Light scrubbing and cleaning

(Part no. CFS1501-37)

Polishing pad Polishing

(Part no. CFS1501-38)

60-grit sanding sheet Coarse sanding

(Part no. CFS1501-33)

120-grit sanding sheet Light sanding

(Part no. CFS1501-34)

240-grit sanding sheet Finish sanding

(Part no. CFS1501-35)

OPERATION

Fig. 2

Fig. 4

Fig. 3

hook-anD-Loop

paD

sanDing sheet

Dust bag

bLower exhaust

ATTACHING HOOK-AND-LOOP SANDING

SHEETS

See Figure 2.

 Unplug the sander.

 Align holes in hook-and-loop type sanding sheet with

holes in pad, then carefully press fuzzy side of the sand-

ing sheet against pad as tightly as possible.

NOTE: Hook-and-loop type sanding sheets can be

reused for the life of the sanding abrasive. It is rec-

ommended that you keep the sanding sheet back-

ing clean to provide for best adhesion. Clean the

sheet and hook-and-loop pad by brushing lightly

with a light brush.

TURNING THE SANDER ON/OFF

See Figure 4.

While holding the tool in normal operating position:

 Push the ON/OFF switch to the left to turn sander on.

 Push the ON/OFF switch to the right to turn sander off.

ATTACHING THE DUST BAG

See Figure 3.

The dust bag provides a dust collection system for the sand-

er. Sanding dust is drawn up through the holes of the sanding

sheet and collected in the dust bag during sanding.

 Unplug the sander.

 Using a slight twisting motion, firmly slide dust bag as-

sembly over blower exhaust on sander.

off

1 2 ... 5 6 7 8 9 10 11 12 13 14

Commentaires sur ces manuels

Pas de commentaire

Ryobi CFS1503K Manuel de l'opérateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi CFS1503K