Ryobi JM81-1 Manuel de l'opérateur télécharger pdf (Page 4)

Page 4

SPECIFIC SAFETY RULES



 Hold tool by insulated gripping surfaces when per-

forming an operation where the cutting tool may

contact hidden wiring or its own cord. Contact with a

“live” wire will make exposed metal parts of the cutting

tool “live” and shock the operator.

ADDITIONAL SAFETY RULES

 Know your power tool. Read operator’s manual care-

fully. Learn its applications and limitations, as well

as the specific potential hazards related to this tool.

Following this rule will reduce the risk of electric shock,

fire, or serious injury.

 Always wear safety glasses. Everyday eyeglasses

have only impact-resistant lenses; they are NOT

safety glasses. Following this rule will reduce the risk of

serious personal injury.

 Protect your lungs. Wear a face or dust mask if the

operation is dusty. Following this rule will reduce the

risk of serious personal injury.

 Protect your hearing. Wear hearing protection dur-

ing extended periods of operation. Following this rule

will reduce the risk of serious personal injury.

 Inspect tool cords periodically and, if damaged, have

repaired at your nearest Authorized Service Center.

Constantly stay aware of cord location. Following this

rule will reduce the risk of electric shock or fire.

 Check damaged parts. Before further use of the tool,

a guard or other part that is damaged should be care-

fully checked to determine that it will operate prop-

erly and perform its intended function. Check for

alignment of moving parts, binding of moving parts,

breakage of parts, mounting, and any other condi-

tions that may affect its operation. A guard or other

part that is damaged should be properly repaired or

replaced by an authorized service center. Following

this rule will reduce the risk of shock, fire, or serious in-

jury.

 Do not abuse cord. Never carry the tool by the cord

or yank it to disconnect it from the receptacle. Keep

cord away from heat, oil, and sharp edges. Following

this rule will reduce the risk of electric shock or fire.

GENERAL SAFETY RULES

SERVICE

 Tool service must be performed only by qualified re-

pair personnel. Service or maintenance performed by

unqualified personnel may result in a risk of injury.

 When servicing a tool, use only identical replacement

parts. Follow instructions in the Maintenance section

of this manual. Use of unauthorized parts or failure to

follow Maintenance Instructions may create a risk of shock

or injury.

 Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one

heavy enough to carry the current your product will

draw. A wire gage size (A.W.G.) of at least 14 is rec-

ommended for an extension cord 50 feet or less in

length. A cord exceeding 100 feet is not recom-

mended. If in doubt, use the next heavier gage. The

smaller the gage number, the heavier the cord. An un-

dersized cord will cause a drop in line voltage resulting in

loss of power and overheating.

 Inspect for and remove all nails from lumber before

using this tool. Following this rule will reduce the risk of

serious personal injury.

 Drugs, alcohol, medication. Do not operate tool while

under the influence of drugs, alcohol, or any medica-

tion. Following this rule will reduce the risk of electric

shock, fire, or serious personal injury.

 Save these instructions. Refer to them frequently and

use them to instruct others who may use this tool. If you

loan someone this tool, loan them these instructions also.

WARNING:

Some dust created by power sanding, sawing, grinding,

drilling, and other construction activities contains chemi-

cals known to cause cancer, birth defects or other repro-

ductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and

other masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such as

those dust masks that are specially designed to filter out

microscopic particles.

SAVE THESE INSTRUCTIONS

1 2 3 4 5 6 7 8 9 ... 21 22

Commentaires sur ces manuels

Pas de commentaire

Ryobi JM81-1 Manuel de l'opérateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi JM81-1