Ryobi ZRJS481LG Manuel d'utilisation et d'entretien télécharger pdf (Page 9)

9 — English

ADJUSTMENTS

WARNING:

Before performing any adjustment, make sure the product

is unplugged from the power supply. Failure to heed this

warning could result in serious personal injury.

TIGHTENING BASE ADJUSTMENT LEVER

See Figures 12 - 13, page 13.

The base adjustment lever may need occasional

tightening.

 Unplug the saw.

 If attached, remove the vacuum attachment.

 Remove the base plate screws and base plate by remov-

ing the four base screws to expose the adjusting nut.

 Release the base adjustment lever by pulling it forward.

 Tighten the adjusting nut 1/4 of a turn in the clockwise

direction.

 Engage the adjustment lever by pushing it back under

the motor assembly and check the base for any move-

ment.

 If the base is still loose, release the adjustment lever and

tighten the adjusting nut another 1/4 of a turn. Repeat

until the base is secure after engaging the adjustment

lever.

 Reinstall the base plate and four base plate screws.

WARNING:

This product and some dust created by power sanding, sawing, grinding, drilling, and other construction activities may

contain chemicals, including lead, known the State of California to cause cancer, birth defects or other reproductive

harm. Wash hands after handling.

Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your

exposure, work in a well ventilated area and with approved safety equipment, such as dust masks that are specially

designed to filter out microscopic particles.

CALIFORNIA PROPOSITION 65

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Pas de commentaire

Ryobi ZRJS481LG Manuel d'utilisation et d'entretien Page 9