Ryobi RY15703 Manuel d'utilisateur télécharger pdf (Page 9)

7 — English

OPERATION

the stems are fed directly into the cutting blade. Older

growth will have thicker stems and will be trimmed easiest

by using a sawing movement.

OPERATING THE HEDGE TRIMMER

See Figure 5.

WARNING:

Read the safety information for safe operation using the

blade. Extreme care must be taken when using blades to

ensure safe operation. Refer to Specific Safety Rules.

 Always hold hedge trimmer with both hands when op-

erating. Use a firm grip on the handles. The unit is used

for cutting in either direction in a slow, sweeping action

from side to side.

 The hedge trimmer should be positioned so that your

body will not come into contact with the muffler on the

power head.Stand so that you are stable and balanced

on both feet.

 Inspect and clear the area of any hidden objects.

 Never use the hedge trimmer near power lines, fencing,

posts, buildings, or other immovable objects.

 Never use a blade after hitting a hard object with-

out first inspecting it for damage. Do not use if any

damage is detected.

WARNING:

When servicing, use only identical replacement parts.

Use of any other parts may create a hazard or cause

product damage.

WARNING:

Always wear safety goggles or safety glasses with side

shields during power tool operation or when blowing

dust. If operation is dusty, also wear a dust mask.

WARNING:

Before inspecting, cleaning, or servicing the machine,

shut off engine, wait for all moving parts to stop, and

disconnect spark plug wire and move it away from spark

plug. Failure to follow these instructions can result in

serious personal injury or property damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use. Use

clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken, or de-

stroy plastic, which may result in serious personal injury.

MAINTENANCE

Only the parts shown on the parts list are intended to be

repaired or replaced by the customer. All other parts should

be replaced at an authorized service center.

WARNING:

Blades are sharp. To reduce the possibility of serious injury,

always wear gloves when performing maintenance on the

hedge trimmer blades. When handling blade assembly,

do not place your hand or fingers between blades or in

any position where they could get pinched or cut. NEVER

touch blades or perform maintenance while the hedge

trimmer attachment is attached to the engine.

BLADE CARE

 Lubricate the cutting blade after each use.

 Periodically inspect the blade for damage and wear.

 If it becomes necessary to have the blade replaced, take

the hedge trimmer to an authorized service center.

LUBRICATING THE BLADE

See Figure 6.

For easier operation and longer blade life, lubricate the

blade before and after each use.

 Lay hedge trimmer on a flat surface.

 Use a brush to remove debris or clippings from the blade.

Wipe any remaining debris away with a clean cloth.

 Apply light weight machine oil along the edge of the top

blade. Wipe any excess oil from the blade.

Occasionally, you should oil the hedge trimmer during

use. Before oiling, stop the hedge trimmer, remove the at-

tachment, then oil. You can then resume trimming. Do not

oil while hedge trimmer is running.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY15703 Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour la vidéo Ryobi RY15703