Ryobi CSB141LZ Manuel de l'opérateur télécharger pdf (Page 12)

12 13

ASSEMBLY

Fig. 4

WRENCH

SPINDLE

LOCK BUTTON

REMOVING BLADE

See Figure 4.

n Unplug the saw.

n Depress spindle lock button.

n Remove blade screw by turning it counterclockwise with

the wrench.

n Remove spring washer and outer blade washer

(“D” washer).

n Lift lower blade guard.

n Remove blade.

EDGE GUIDE

See Figure 5.

Use the edge guide when making long or wide rip cuts with

the saw.

n Unplug the saw.

n Place edge guide through holes in base.

n Adjust edge guide to the width needed.

n Tighten edge guide knob securely.

DUST NOZZLE KIT

See Figure 6.

The dust nozzle kit directs saw dust away from the operator.

The adaptor fits over the dust chute which is located on the

upper blade guard. The nozzle attaches to the adaptor.

NOTE: If you use the nozzle, you should always connect it

to a standard vacuum hose.

n Unplug the saw.

n Lift lower blade guard.

n Orient adaptor to fit into the dust chute opening on upper

blade guard.

n Secure adaptor with screw provided.

n Align hole in nozzle with raised lip on adaptor and snap

into place when using a vacuum hose.

Fig. 6

ADAPTOR

RAISED LIP

SCREW

NOZZLE

DUST CHUTE

OPENING

HOLE

EDGE GUIDE

KNOB

Fig. 5

BLADE

SCREW

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi CSB141LZ Manuel de l'opérateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Scies circulaires Ryobi CSB141LZ