Ryobi CSB141LZ Manuel de l'opérateur télécharger pdf (Page 16)

16 17

OPERATION

OPERATING THE SAW

See Figures 13 - 15.

It is important to understand the correct method for operat-

ing the saw. Refer to the figures in this section to learn the

correct and incorrect ways for handling the saw.

WARNING:

To make sawing easier and safer, always maintain proper

control of the saw. Loss of control could cause an ac-

cident resulting in possible serious injury.

DANGER:

When lifting the saw from the workpiece, the blade is

exposed on the underside of the saw until the lower blade

guard closes. Make sure the lower blade guard is closed

before setting the saw down.

To make the best possible cut:

n Hold the saw firmly with both hands.

n Avoid placing your hand on the workpiece while making

a cut.

n Support the workpiece so that the cut is always on your

right.

n Support the workpiece near the cut.

n Clamp the workpiece securely so that the workpiece will

not move during the cut.

n Avoid placing the saw on the part of the workpiece that

will fall off when the cut is made.

n Place the workpiece with the “good” side down.

n Draw a guideline along the desired line of cut before

beginning your cut.

n Keep the cord away from the cutting area. Always place

the cord to prevent it from hanging up on the workpiece

while making a cut.

DANGER:

If the cord hangs up on the workpiece during a cut, re-

lease the switch trigger immediately. Unplug the saw and

reposition the cord to prevent it from hanging up again.

DANGER:

Using a saw with a damaged cord could result in serious

injury or death. If the cord has been damaged, have it

replaced before using the saw again.

Fig. 13

Fig. 14

Fig. 15

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi CSB141LZ Manuel de l'opérateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Scies circulaires Ryobi CSB141LZ