Ryobi RJ185V Manuel de l'opérateur télécharger pdf (Page 6)

6 - English

FEATURES

PRODUCT SPECIFICATIONS

Stroke Length ......................................................... 1-1/8 in.

Switch .......................................................... Variable Speed

ASSEMBLY

WARNING:

Do not use this product if it is not completely assembled

or if any parts appear to be missing or damaged. Use of

a product that is not properly and completely assembled

or with damaged or missing parts could result in serious

personal injury.

WARNING:

Do not attempt to modify this product or create

accessories or attachments not recommended for use

with this product. Any such alteration or modification is

misuse and could result in a hazardous condition leading

to possible serious personal injury.

OPERATION

WARNING:

Do not allow familiarity with products to make you care-

less. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes resulting in possible

serious injury.

WARNING:

Do not use any attachments or accessories not

recommended by the manufacturer of this product. The

use of attachments or accessories not recommended

can result in serious personal injury.

APPLICATIONS

You may use this product for the purposes listed below:

Cutting all types of wood products (lumber, plywood,

paneling, composition board, and hard wood)

Cutting masonite and plastic

Cutting drywall

Cutting metals such as sheet steel, pipe, steel rods, alu-

minum, brass, and copper

SELECTING BLADES

Selecting the correct type of blade is important in order to

obtain the best performance from the saw. Select the blade

based on the application and on the material you wish to

cut. Selecting the right blade will give you a smoother, faster

cut and prolong the life of the blade.

Blades with fewer teeth, 10 teeth per inch (TPI) are typically

used for cutting wood, while blades with more teeth are

better for cutting metal or plastic. We recommend 14 TPI for

plastics and soft metals and 18 TPI for hard metals.

INSTALLING/REMOVING BLADE

See Figure 1, page 9.

 Unplug the saw.

 Lift the blade release lever.

 Insert saw blade until it is fully seated.

NOTE: Blade can be installed with teeth facing either up

or down.

 Lower the blade release lever.

 To remove the blade, lift the blade release lever.

TURNING THE SAW ON/OFF

See Figure 2, page 9.

 To turn the saw on: Depress the switch trigger.

 To turn the saw off: Release the switch trigger.

If any parts are damaged or missing, please call 1-800-525-2579 for assistance.

Strokes per Minute ......................................... 0-3,000 max.

Input ..................................120 V, AC only, 60 Hz, 10 Amps

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi RJ185V Manuel de l'opérateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Scies circulaires Ryobi RJ185V