7
English (Original Instructions)
and that battery pack is secured in hedge trimmer
before beginning operation.
REMOVING BATTERY PACK
See Figure 2
Locate the latch on the battery pack and depress to
release the battery pack from the hedge trimmer.
Remove battery pack from the hedge trimmer.
CAUTION
When placing battery pack in your hedge trimmer,
be sure raised rib on battery pack aligns with groove
in hedge trimmer and latch snaps in place properly.
Improper assembly of battery pack can cause damage
to internal components.
STARTING THE HEDGE TRIMMER
See Figure 3
Remove the blade cover.
For added safety, there is a micro switch in the
front handle. When operating, hold the trimmer with
both hands, one hand to pull the trigger lock button
backward and squeeze the trigger, and the other hand
to squeeze the front handle.
Release the trigger lock button and continue to
squeeze the trigger for extended operation.
STOPPING THE HEDGE TRIMMER
Release the trigger to stop the hedge trimmer.
Upon release of the trigger, the trigger lock button will
be automatically reset to the lock position.
Remove battery pack from the hedge trimmer.
BLOCK RELEASE GEAR BOX
This hedge trimmer is equipped with a block release
gear box. If the blade jams, the blades will automatically
retract allowing the jam to be cleared easily. Release
the triggers, remove jammed material, then squeeze
trigger again to restart the hedge trimmer. If the stem
is too dense or too hard to be trimmed, use a pruning
saw to clear the stem.
OPERATING TIPS
See Figure 4-5
Do not force the hedge trimmer through heavy
shrubbery. This can cause the blades to bind and slow
down. If the blades slow down, reduce the pace.
Do not try to cut stems or twigs that are larger than
20mm thick, or those obviously too large to feed into
the cutting blade. Use a non-powered hand saw or
pruning saw to trim large stems.
If desired, you can use a string to help cut your hedge
SPECIFICATIONS
Model
RHT36 RHT36B
Voltage 36 volts
No load speed 1500 /min
Blade speed 3000 spm
Blade length 550 mm
Cutting capacity 20 mm
Measured sound
pressure level
K
PA
=81 dB(A), K
PA
=2 dB(A)
Measured sound
power level
L
WA
=90 dB(A), K
WA
=2 dB(A)
Vibration ah= 1.86 m/s
2
, K=1.5 m/s
2
Weight
4.43 kg (with
Battery pack)
3.06 kg (without
Battery pack)
Battery pack BPL3626
Charger BCL3620
FEATURES
1. Blade cover
2. Blade
3. Hedgesweep™ debris sweeper
4. Guard
5. Sensor switch
6. Front handle
7. Battery pack
8. Trigger lock button
9. Trigger
10. Charger
11. Latch
12. Cutting blade
13. Blade guard
OPERATION
For complete charging instructions, refer to the
Operator’s Manuals for your Ryobi battery pack and
charger models.
NOTE: To avoid serious personal injury, always remove
the battery pack and keep hands clear of the lock-out
button when carrying or transporting the tool.
INSTALLING BATTERY PACK
See Figure 2
Place the battery pack in the hedge trimmer. Align
raised rib on battery pack with groove in hedge
trimmer.
Make sure the latch on the battery pack snaps in place
(16 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels