Ryobi ELS-52 Manuel d'utilisateur télécharger pdf (Page 16)

GENERAL SAFETY RULES

WARNING

Read and understand all instructions. Failure to

follow all instructions listed below, may result in

electric shock, fire and/or serious personal injury.

READ ALL INSTRUCTIONS.

■ KNOW YOUR POWER TOOL. Read the operator’s

manual carefully. Learn the applications and

limitations as well as the specific potential hazards

related to this tool.

■ GUARD AGAINST ELECTRICAL SHOCK BY

PREVENTING BODY CONTACT WITH GROUNDED

SURFACES. For example: pipes, radiators, ranges,

refrigerator enclosures.

■ KEEP GUARDS IN PLACE and in good working order.

■ REMOVE ADJUSTING KEYS AND WRENCHES.

Form habit of checking to see that keys and adjusting

wrenches are removed from tool before turning it on.

■ KEEP WORK AREA CLEAN. Cluttered areas and

benches invite accidents. DO NOT leave tools or

pieces of wood on the tool while it is in operation.

■ DO NOT USE IN DANGEROUS ENVIRONMENTS.

Do not use power tools in damp or wet locations or

expose to rain. Keep the work area well lit.

■ KEEP CHILDREN AND VISITORS AWAY. All visitors

should wear safety glasses and be kept a safe

distance from work area. Do not let visitors contact

tool or extension cord while operating.

■ MAKE WORKSHOP CHILDPROOF with padlocks,

master switches, or by removing starter keys.

■ DON’T FORCE THE TOOL. It will do the job better

and safer at the feed rate for which it was designed.

■ USE THE RIGHT TOOL. Do not force the tool or

attachment to do a job for which it was not designed.

■ USE THE PROPER EXTENSION CORD. Make sure

your extension cord is in good condition. Use only a

cord heavy enough to carry the current your product

will draw. An undersized cord will cause a drop in line

voltage resulting in loss of power and overheating.

■ DRESS PROPERLY. Do not wear loose clothing,

neckties, or jewelry that can get caught and draw you

into moving parts. Rubber gloves and nonskid

footwear are recommended when working outdoors.

Also wear protective hair covering to contain long hair.

■ ALWAYS WEAR SAFETY GLASSES WITH SIDE

SHIELDS. Everyday eyeglasses have only impact-

resistant lenses, they are NOT safety glasses.

■ SECURE WORK. Use clamps or a vise to hold work

when practical, it is safer than using your hand and

frees both hands to operate the tool.

■ DO NOT OVERREACH. Keep proper footing and

balance at all times.

■ MAINTAIN TOOLS WITH CARE. Keep tools sharp

and clean for better and safer performance. Follow

instructions for lubricating and changing accessories.

■ DISCONNECT TOOLS. When not in use, before

servicing, or when changing attachments, blades,

bits, cutters, etc., all tools should be disconnected

from power source.

■ AVOID ACCIDENTAL STARTING.

■ USE RECOMMENDED ACCESSORIES. Consult the

operator’s manual for recommended accessories.

The use of improper accessories may result in injury.

■ NEVER STAND ON TOOL. Serious injury could

occur if the tool is tipped.

■ CHECK DAMAGED PARTS. Before further use of

the tool, a guard or other part that is damaged should

be carefully checked to determine that it will operate

properly and perform its intended function. Check for

alignment of moving parts, binding of moving parts,

breakage of parts, mounting and any other conditions

that may affect its operation. A guard or other part

that is damaged must be properly repaired or

replaced by an authorized service center to avoid risk

of personal injury.

■ USE THE RIGHT DIRECTION OF FEED. Feed work

into a blade, cutter, or sanding spindle against the

direction or rotation of the blade, cutter, or sanding

spindle only.

■ NEVER LEAVE TOOL RUNNING UNATTENDED.

TURN THE POWER OFF. Don't leave tool until it

comes to a complete stop.

■ PROTECT YOUR LUNGS. Wear a face or dust mask

if the cutting operation is dusty.

■ PROTECT YOUR HEARING. Wear hearing

protection during extended periods of operation.

■ DO NOT ABUSE CORD. Never carry tool by the cord

or yank it to disconnect from receptacle. Keep cord

from heat, oil, and sharp edges.

■ USE OUTDOOR EXTENSION CORDS. When tool is

used outdoors, use only extension cords with

approved ground connection that are intended for use

outdoors and so marked.

■ NEVER USE IN AN EXPLOSIVE ATMOSPHERE.

Normal sparking of the motor could ignite fumes.

English

E I P NL FIN GR TR

ELS-52_9 lgs 12/3/01 2:36 PM Page 11

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 96 97

Commentaires sur ces manuels

Pas de commentaire

Ryobi ELS-52 Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Séparateurs de bûches Ryobi ELS-52