Ryobi RY64400 Manuel de l'opérateur télécharger pdf (Page 11)

7 - English

NOTE: Do not allow throttle cable to become pinched

when installing the handlebar.

Align the holes in the clip, the upper handlebar and lower

handlebar.

Install bolt as shown in Figure 3.

Thread handlebar knob onto bolt and tighten securely.

Repeat with other side

INSTALLING THE WHEEL/DRAG BAR

ASSEMBLY

See Figures 4 - 5.

Use the wheel/drag bar assembly to transport the unit to

and from the work area.

To install:

 Locate the Wheel/Drag Bar Adjustment Knob

NOTE: For installation with the Drag bar up, see

Figure 4; for installation with the Drag bar down, see

Figure 5.

 Insert the wheel/drag bar assembly support rod, with

drag bar pointed upward, into the opening beneath the

adjustment knob. To place the wheels in a high position,

insert the rod to the first hole. For a lower wheel position,

insert the rod to the second or third hole.

 Insert wheel/drag bar adjustment knob. Rotate clockwise

to secure the wheel assembly in place.

ASSEMBLY

WARNING:

Do not attempt to modify this product or create acces-

sories not recommended for use with this product. Any

such alteration or modification is misuse and could result

in a hazardous condition leading to possible serious

personal injury.

WARNING:

To prevent accidental starting that could cause serious

personal injury, always disconnect the engine spark plug

wire from the spark plug when assembling parts.

INSTALLING THE FRONT HANDLE

See Figure 2.

 Position the front handle as shown with label facing up.

 Depress the buttons on the handle and insert into the

frame. Press down on the handle until the button on the

handle clicks into place

INSTALLING THE HANDLEBAR

See Figure 3.

 Locate handlebar knobs and bolts.

 Position upper handlebar onto lower handlebar. Make

sure the throttle cable and throttle trigger is on the right

side as shown.

OPERATION

WARNING:

Do not allow familiarity with this product to make you

careless. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1, along with hearing protection.

Failure to do so could result in objects being thrown into

your eyes and other possible serious injuries.

WARNING:

Do not use any attachments or accessories not

recommended by the manufacturer of this product. The

use of attachments or accessories not recommended

can result in serious personal injury.

WARNING:

Do not allow hands, feet, or any other part of the body

or clothing near the rotating tines or any other moving

part. The tines begin to rotate forward once the engine

is started and the throttle trigger is depressed. The tines

continue to rotate until the throttle trigger is released. Fail-

ure to avoid contact could cause serious personal injury.

CAUTION:

Attempting to start the engine before it has been properly

filled with lubricant will result in equipment failure.

ADDING/CHECKING ENGINE LUBRICANT

See Figure 6.

Engine lubricant has a major influence on engine

performance and service life. This unit is shipped with a

20W50 engine lubricant to assist in the break-in period.

For best operating performance, continuing to use 20W50

engine lubricant is recommended, however, SAE 30, 10W30,

or 10W40 are all acceptable lubricants to use in this product.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY64400 Manuel de l'opérateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Mini-faucheuses Ryobi RY64400