Ryobi BGH825 Manuel de l'opérateur télécharger pdf (Page 13)

Page 13

ASSEMBLY

WASHERS

HEX BOLTS

BGH615

WORK

REST

BGH625

BGH825

WORK REST – BGH615

See Figure 7a.

Mount the work rests to the inside of each wheel guard us-

ing two hex bolts (8 mm x 8) and two washers (8 mm) on

each side.

Before tightening the bolts, adjust the gap between the

grinding wheel and the work rest to a maximum of 1/16 in.

Tighten securely.

WORK REST – BGH625

See Figure 7b.

Mount the work rests to the work rest bracket using the

knob, washer, and one hex nut.

Before tightening the bolts, adjust the gap between the

grinding wheel and the work rest to a maximum of 1/16 in.

Tighten securely.

WORK REST – BGH825

See Figure 7c.

Before attempting to mount the work rest, remove the hex

nut and star washer from the phillips screw. See Figure 7c.

Place the work rest over the phillips screw before replacing the

hex nut and star washer. Using the hex bolt (5 mm x 10 mm)

and washer (5 mm), secure the work rest against the inside

of the wheel guard.

Before tightening the bolts, adjust the gap between the

grinding wheel and the work rest to a maximum of 1/16 in.

Tighten securely.

Fig. 7a

Fig. 7b

Fig. 7c

HEX

NUT

WASHER

WORK

REST

HEX NUT

STAR

WASHER

WORK

REST

WASHER

HEX BOLT

WORK REST

BRACKET

PHILLIPS

SCREW

KNOB

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Commentaires sur ces manuels

Pas de commentaire

Ryobi BGH825 Manuel de l'opérateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi BGH825