Ryobi D46C Manuel de l'opérateur télécharger pdf (Page 11)

OPERATION

INSTALLING BITS

See Figure 5 - 6.

 Unplug the drill.

 Open or close the chuck jaws to a point where the open-

ing is slightly larger than the bit size you intend to use.

Also, raise the front of the drill slightly to keep the bit from

falling out of the chuck jaws.

 Insert the drill bit.

WARNING:

Make sure to insert the drill bit straight into the chuck

jaws. Do not insert the drill bit into the chuck jaws at

an angle then tighten, as shown infigure 6. This could

cause the drill bit to be thrown from the drill, resulting in

possible serious personal injury or damage to the

chuck.

 Tighten the chuck jaws securely on the bit.

NOTE: Rotate the chuck body in the direction of the ar-

row marked LOCK to close the chuck jaws. Do not use

a wrench to tighten or loosen the chuck jaws.

REMOVING BITS

See Figure 5.

 Unplug the drill.

 Open the chuck jaws.

NOTE: Rotate the chuck body in the direction of the arrow

marked UNLOCK to open the chuck jaws. Do not use a

wrench to tighten or loosen the chuck jaws.

 Remove the drill bit.

LOCK-ON BUTTON

See Figure 7.

This drill is equipped with a lock-on feature, which is

convenient for continuous drilling for extended periods of

time. To lock-on:

 Depress the switch trigger.

 Push in and hold the lock-on button, located on the side

of the handle.

 Release the switch trigger.

 Release the lock-on button and the drill will continue

running.

 To release the lock, depress and release the switch trigger.

If the lock-on feature is engaged during use and the drill

becomes disconnected from the power supply, disengage

the lock-on feature immediately.

Fig. 6

WRONG

Fig. 7

UNLOCK

(RELEASE)

DRILL BIT

CHUCK

JAWS

CHUCK BODY

LOCK

(TIGHTEN)

Fig. 5

RIGHT

CHUCK

COLLAR

SWITCH

TRIGGER

LOCK-ON

BUTTON

DIRECTION OF

ROTATION SELECTOR

(FORWARD/REVERSE)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Ryobi D46C Manuel de l'opérateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi D46C