Ryobi RTS30 Manuel de l'opérateur télécharger pdf (Page 22)

ASSEMBLY

TO CHECK AND ALIGN THE SPREADER/RIVING

KNIFE AND SAW BLADE

See Figures 17 - 18.

To check alignment of the spreader/riving knife:

 Unplug the saw.

 Raise the saw blade by turning the height/bevel adjusting

handwheel clockwise.

 Remove the anti-kickback pawls and blade guard

assembly. Place a framing square or straight edge against

both the saw blade and the spreader.

NOTE: Place framing square between carbide teeth and

measure from blade. This step will insure framing square

is square against blade from the front to back of blade.

 The saw blade and spreader/riving knife are aligned when

the framing square contacts both the blade and spreader/

riving knife evenly with no gaps.

If the spreader/riving knife is out of alignment with the saw

blade, adjustment is needed. The spreader/riving knife must

be in alignment front to back (horizontally) and top to bot-

tom (vertically).

To adjust (horizontally):

 Remove the blade guard assembly and anti-kickback

pawls.

 Raise the blade to its full height.

 Insert the hex key through the slot on the back of the

saw. Two adjustment screws can be accessed through

the slot.

 Turn the adjustment screws to reposition the spreader/

riving knife left or right as needed to align the spreader/

riving knife with the saw blade.

 Once properly aligned, securely retighten the screws.

To adjust (vertically):

 Push either side of the riving knife to align it top to bot-

tom with the blade. Check its position after adjustment

to ensure that it is vertically aligned with the blade.

Fig. 18

FRAMING

SQUARE

FRAMING

SQUARE

SPREADER/

RIVING KNIFE

BLADE

SPREADER/

RIVING KNIFE

HORIZONTAL ADJUSTMENT

VERTICAL ADJUSTMENT

FRAMING

SQUARE

Fig. 17

SPREADER/

RIVING KNIFE

HEX KEY

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 41 42

Commentaires sur ces manuels

Pas de commentaire

Ryobi RTS30 Manuel de l'opérateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi RTS30