Ryobi YG301PD Manuel d'utilisateur télécharger pdf (Page 4)

4 - English

GENERAL SAFETY RULES

 Keep the exterior of the air compressor dry, clean, and

free from oil and grease. Always use a clean cloth when

cleaning. Never use brake fluids, gasoline, petroleum-

based products, or any strong solvents to clean the unit.

Following this rule will reduce the risk of deterioration of

the enclosure plastic.

SERVICE

When servicing a product, use only identical replace-

ment parts. Follow instructions in the Maintenance

section

of this manual. Use of unauthorized parts or

failure to follow Maintenance instructions may create a

risk of injury.

Service must be performed only by qualified repair

personnel. Service or maintenance performed by un-

qualified personnel may result in a risk of injury.

Disconnect power supply, open drain valve to de-

compress tanks and allow water to drain, and allow

air compressor to become cool to the touch before

servicing. Turn pressure regulator knob fully counter-

clockwise after shutting off air compressor.

SPECIFIC SAFETY RULES

Know your air compressor. Read operator’s manual

carefully. Learn its applications and limitations, as well

as the specific potential hazards related to this product.

Following this rule will reduce the risk of electric shock,

fire, or serious injury.

Drain tanks of moisture after each day’s use.

If unit will not be used for a while, it is best to leave drain

valve open until such time as it is to be used. This will

allow moisture to completely drain out and help prevent

corrosion on the inside of tanks.

Risk of Fire or Explosion. Do not spray flammable liquid

in a confined area. Spray area must be well ventilated. Do

not smoke while spraying or spray where spark or flame

is present. Keep compressors as far from the spraying

area as possible, at least 15 feet from the spraying area

and all explosive vapors.

Risk of Bursting. Do not adjust regulator to result in output

pressure greater than marked maximum pressure of attach-

ment. Do not use at pressure greater than 135 psi.

If connected to a circuit protected by fuses, use time-

delay fuses with this product.

To reduce the risk of electric shock, do not expose to

rain. Store indoors.

Inspect tanks yearly for rust, pin holes, or other im-

perfections that could cause it to become unsafe.

Never weld or drill holes in the air tanks.

Make sure the hose is free of obstructions or snags.

Entangled or snarled hoses can cause loss of balance or

footing and may become damaged.

Use the air compressor only for its intended use. Do

not alter or modify the unit from the original design

or function.

Always be aware that misuse and improper handling of

this product can cause injury to yourself and others.

Never leave a tool unattended with the air hose at-

tached.

Never point any air tool toward yourself or others.

Do not operate this air compressor if it does not con-

tain a legible warning label.

Do not continue to use a tool or hose that leaks air or

does not function properly.

Always disconnect the air supply and power supply

before making adjustments, servicing a product, or when

a product is not in use.

Do not attempt to pull or carry the air compressor by

the hose.

Your tool may require more air consumption than this

air compressor is capable of providing.

Always follow all safety rules recommended by the

manufacturer of your air tool, in addition to all safety

rules for the air compressor. Following this rule will

reduce the risk of serious personal injury.

Never direct a jet of compressed air toward people or

animals. Take care not to blow dust and dirt towards

yourself or others. Following this rule will reduce the risk

of serious injury.

Do not use this air compressor to spray chemicals.

Your lungs can be damaged by inhaling toxic fumes. A

respirator may be necessary in dusty environments or

when spraying paint. Do not carry while painting.

To reduce the risk of over inflation, use a reliable pres-

sure gauge periodically during inflation.

Inspect product cords and hoses periodically and, if

damaged, have repaired at your nearest Authorized

Service Center. Constantly stay aware of cord loca-

tion. Following this rule will reduce the risk of electric

shock or fire.

1 2 3 4 5 6 7 8 9 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Ryobi YG301PD Manuel d'utilisateur Page 4

Commentaires sur ces manuels