Ryobi SC155VS Manuel de l'opérateur télécharger pdf (Page 15)

ADJUSTING BLADE TENSION

See Figure 9.

 Turning the blade tension knob counterclockwise

decreases (or loosens) blade tension.

 Turning the blade tension knob clockwise increases (or

tightens) blade tension.

NOTE: Adjustments to blade tension can be made at any

time.

Check tension by the sound the blade makes when plucked

like a guitar string. This method of adding tension to the

blade can be developed with practice and requires knowing

the scroll saw.

 Pluck the back straight edge of blade while turning ten-

sion adjusting knob. Sound should be a musical note.

Sound becomes less flat as tension increases. Sound

decreases with too much tension.

NOTE: Be careful not to adjust blade too tight. Too much

tension may cause the blade to break as soon as you start

cutting. Too little tension may cause the blade to bend or

break before the teeth wear out.

DECREASE

INCREASE

BLADE TENSION KNOB

Fig. 9

ASSEMBLY

OPERATION

APPLICATIONS

You may use this product for the following purposes:

 Cutting wood, wood composition products, plastic, and

other fibrous material up to 2 in. thick

 Cutting nonferrous metals such as aluminum, brass, and

copper

BASIC OPERATION OF THE SCROLL SAW

Before starting a cut, watch the saw run. If you experience

excessive vibration or unusual noise, stop immediately. Turn

the saw off, remove the switch key, and unplug the saw. Do

not restart until locating and correcting the problem.

NOTE: After the saw is turned ON, a hesitation before blade

movement is normal.

WARNING:

Do not allow familiarity with products to make you care-

less. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side

shields when operating power tools. Failure to do so

could result in objects being thrown into your eyes

resulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not

recommended by the manufacturer of this product. The

use of attachments or accessories not recommended

can result in serious personal injury.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Commentaires sur ces manuels

Pas de commentaire

Ryobi SC155VS Manuel de l'opérateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Scies circulaires Ryobi SC155VS