Ryobi TS1344L Manuel de l'opérateur

Naviguer en ligne ou télécharger Manuel de l'opérateur pour Scies à onglets Ryobi TS1344L. Ryobi TS1344L Operator`s manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 30
  • Table des matières
  • MARQUE LIVRES
  • Noté4.6 / 5. Basé sur9 avis des utilisateurs
Vue de la page 0
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR’S MANUAL
10 in. Compound Miter Saw
TS1344L - Double Insulated
Your miter saw has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
Vue de la page 0
1 2 3 4 5 6 ... 29 30

Résumé du contenu

Page 1 - OPERATOR’S MANUAL

SAVE THIS MANUAL FOR FUTURE REFERENCEOPERATOR’S MANUAL10 in. Compound Miter SawTS1344L - Double InsulatedYour miter saw has been engineered and manufa

Page 2 - WARRANTY

10FEATURESKNOW YOUR COMPOUND MITER SAWSee Figure 1.The safe use of this product requires an understanding of the information on the tool and in this o

Page 3 - GENERAL SAFETY RULES

11FEATURESMITER LOCK HANDLESee Figure 2.The miter lock handle securely locks the saw at desired miter angles.POSITIVE STOPS ON MITER TABLEPositive sto

Page 4 - SPECIFIC SAFETY RULES

12LOOSE PARTSWARNING:The use of attachments or accessories not listed might be hazardous and could cause serious personal injury.The following items a

Page 5

13ASSEMBLYFig. 7MOUNTING SURFACE BASETRACE HOLES AT THESE LOCATIONS FOR HOLE PATTERNTRACE HOLES AT THESE LOCATIONS FOR HOLE PATTERNWARNING:Do not con

Page 6 - CAUTION:

14ASSEMBLYFig. 8Fig. 10TO LOOSENMITER LOCK HANDLETO TIGHTENDUST BAGEXHAUST PORTBASEWORK CLAMPMITER LOCK HANDLESee Figure 8.To install the miter lock h

Page 7 - ELECTRICAL

15INSTALLING BATTERIES FOR LASERSee Figure 11.Remove screw from battery compartment cover using the Phillips end of the supplied blade wrench. Remov

Page 8 - GLOSSARY OF TERMS

16ASSEMBLYTO INSTALL / REPLACE THE BLADESee Figures 13 - 14.WARNING:A 10 in. blade is the maximum blade capacity of the saw. Never use a blade that is

Page 9

17ASSEMBLYWARNING:Make sure the spindle lock button is not engaged before reconnecting saw into power source. Never engage spindle lock button when

Page 10 - FEATURES

18ASSEMBLYFig. 17Fig. 18VIEW OF BLADE NOT SQUARE WITH FENCE, ADJUSTMENTS ARE REQUIREDVIEW OF BLADE NOT SQUARE WITH FENCE, ADJUSTMENTS ARE REQUIREDMITE

Page 11 - TOOLS NEEDED

19ASSEMBLYSQUARING THE BLADE TO THE MITER TABLESee Figures 19 - 22. Unplug the saw. Pull the saw arm all the way down and engage the lock pin to h

Page 12 - LOOSE PARTS

2 Introduction ...

Page 13 - ASSEMBLY

20OPERATIONWARNING:Do not allow familiarity with tools to make you care-less. Remember that a careless fraction of a second is sufficient to inflict s

Page 14

21OPERATION Rotate the control arm until the pointer aligns with the desired angle on the miter scale. Tighten the miter lock handle securely. P

Page 15

22OPERATION Grasp the stock firmly with one hand and secure it against the fence. Use the optional work clamp or a C-clamp to secure the workpiece w

Page 16

23OPERATION Grasp the stock firmly with one hand and secure it against the fence. Use the optional work clamp or a C-clamp to secure the workpiece w

Page 17

24OPERATION4 PITCH OF SIDENUMBER OF SIDES0°6M- 45.00°B- 0.00°5°10°15°20°25°30°35°40°45°50°55°60°65°70°75°80°85°90°578 910M- 36.00°B- 0.00°M-

Page 18

25OPERATIONWhen setting the bevel and miter angles for compound miters, remember that the settings are interdependent; changing one angle changes the

Page 19

26OPERATIONWARNING: To avoid a kickback and to avoid serious personal injury, never position the concave edge of bowed or warped material against the

Page 20 - OPERATION

27ADJUSTMENTSWARNING:Before performing any adjustment, make sure the tool is unplugged from the power supply. Failure to heed this warning could resul

Page 21

28ADJUSTMENTSDANGER:Laser radiation. Avoid direct eye contact with light source.WARNING:Use of controls or adjustments or performance of pro-cedures o

Page 22

29MAINTENANCEWARNING:When servicing, use only identical Ryobi replacement parts. Use of any other parts can create a hazard or cause product damage.WA

Page 23

3GENERAL SAFETY RULESWARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fir

Page 24

• SERVICENow that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Authorized Service

Page 25

4GENERAL SAFETY RULES INSPECT TOOL CORDS PERIODICALLY. If damaged, have repaired by a qualified service technician at an authorized service facilit

Page 26

5SPECIFIC SAFETY RULES NEVER reach behind, under, or within three inches of the blade and its cutting path with hands and fingers for any reason.

Page 27 - ADJUSTMENTS

6SYMBOLSSome of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols wil

Page 28

7EXTENSION CORDSWhen using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to hand

Page 29 - MAINTENANCE

8GLOSSARY OF TERMSNon-Through Cuts (table saws and compound sliding miter saws)Any cutting operation where the blade does not extend completely throug

Page 30

9FEATURESPRODUCT SPECIFICATIONSBlade Arbor ................ 5/8 in.Blade Diameter .......

Commentaires sur ces manuels

Pas de commentaire