Ryobi BTS16 Manuel d'utilisateur télécharger pdf (Page 35)

ADJUSTMENTS

 Rotate the blade by hand to make sure it turns freely.

 Lower the saw blade and reinstall the throat plate.

NOTE: Securely tighten throat plate screws. Do not allow

the throat plate to bow up above the table surface.

TO SET THE BLADE AT 0° AND 45°

See Figures 46 - 47.

The angle settings of your saw have been set at the factory

and, unless damaged in shipping, should not require set-

ting during assembly. After extensive use, it may need to

be checked.

 Unplug the saw.

 Raise the blade and the blade guard.

 If the blade is not perfectly vertical (0°), loosen the adjust-

ment bolt and the bevel locking lever.

 Place a combination square beside the blade on the left.

Lock the angle by pushing the bevel locking lever and

retighten the adjustment bolt.

 Turn the bevel handle until the bevel indicator points to

zero. If the bevel handle is turned as far as possible and

doesn't indicate zero properly, you may need to adjust

the bevel indicator.

NOTE: It will be necessary to remove the bevel handle

to adjust the bevel indicator.

 If the blade is not an exact 45°, loosen the adjustment

bolt and the bevel locking lever.

 Turn the bevel handle until the bottom of the blade has

moved completely to the left side of the slot. Lock the

angle by pushing the bevel locking lever.

 If the blade is not an exact 45°, loosen the adjustment

bolt and the bevel locking lever.

 Adjust the bevel indicator to 45°.

 Turn the power switch to the ON position.

 Make a test cut.

Fig. 47

0° ADJUSTMENT

BOLT

COMBINATION

SQUARE

BLADE

BEVEL

INDICATOR

BEVEL

LOCKING

LEVER

BEVEL

HANDLE

45°

COMBINATION

SQUARE

BLADE

45° ADJUSTMENT

BOLT

BEVEL

HANDLE

BEVEL

INDICATOR

BEVEL

LOCKING

LEVER

Fig. 46

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Commentaires sur ces manuels

Pas de commentaire

Ryobi BTS16 Manuel d'utilisateur Page 35

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à moteur Ryobi BTS16