Ryobi RTS21 Manuel d'utilisateur télécharger pdf (Page 16)

ASSEMBLY

TO REMOVE/REPLACE THE THROAT PLATE

See Figure 10.

 Lower the blade by turning the height/bevel adjusting

handwheel counterclockwise.

 To remove the throat plate, place your index finger in

the hole and lift the front end pulling the throat plate out

toward the front of the saw.

 To reinstall the throat plate, first slip the tab into the slot

at the back of the saw and then push down to secure in

place.

TO CHANGE RIVING KNIFE POSITIONS

See Figure 11.

This saw is shipped with a riving knife that should be placed

in the “down” position for non-through cutting and must be

placed in the “up” position for all other cutting operations.

 Unplug the saw.

To place in the “up” position for all through cutting:

 Remove the throat plate.

 Raise the saw blade by turning the height/bevel adjusting

handwheel clockwise.

 Unlock the release lever by pulling it up.

 Grasp the riving knife and pull it towards the right side of

the saw to release the riving knife from the spring-loaded

riving clamp.

 Pull the riving knife up until the internal pins are engaged

and the riving knife is above the saw blade.

 Lock the release lever by pushing the lever down.

 Reinstall the throat plate.

To place in riving knife “down” position for all non-

through cutting:

 Remove the throat plate.

 Raise the saw blade by turning the height/bevel adjusting

handwheel clockwise.

 Unlock the release lever by pulling it up.

 Grasp the riving knife and pull it towards the right side of

the saw to release the riving knife from the spring-loaded

riving clamp.

 Push the riving knife down until it is below the saw blade.

 Pull the riving knife up until the internal pins are engaged

and the riving knife is above the saw blade.

 Lock the release lever by pushing the lever down.

 Reinstall the throat plate.

Fig. 11

IN “UP” POSITION FOR THROUGH CUTTING

IN “DOWN” POSITION FOR NON-THROUGH CUTTING

RELEASE

LEVER

(LOCKED)

Fig. 11

RELEASE

LEVER

(UNLOCKED)

THROAT

PLATE

Fig. 10

RIVING

KNIFE

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Ryobi RTS21 Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à moteur Ryobi RTS21