Ryobi SC164VS Manuel d'utilisateur télécharger pdf (Page 10)

FEATURES

The following tools (not included) are needed for assembly and alignment:

TOOLS NEEDED

SAWDUST BLOWER

Keeps the line of cut on the workpiece clean for more ac-

curate scroll cuts. For best results, always direct air flow at

the blade and the workpiece.

SAWDUST EXHAUST

This feature allows you to attach any 1-1/4 in. (32 mm)

vacuum hose for easy sawdust collection.

SAW TABLE WITH THROAT PLATE

Your scroll saw has an aluminum saw table with tilt control

for maximum accuracy. The throat plate, inserted in the saw

table, allows for blade clearance.

SWITCH AND SWITCH KEY

Your scroll saw has an easy access power switch. To lock

in the OFF position, remove the yellow switch key. Place

the key in a location inaccessible to children and others not

qualified to use the tool.

TABLE LOCK KNOB

Allows you to tilt the table and lock it at the desired angle

up to 45°.

VARIABLE SPEED KNOB

Turn the knob to adjust the speed from the high speed

of approximately 1,600 r/min. (RPM) to the low speed of

approximately 400 r/min. (RPM).

KNOW YOUR SCROLL SAW

See Figure 2.

The safe use of this product requires an understanding of

the information on the product and in this operator’s manual

as well as a knowledge of the project you are attempting.

Before use of this product, familiarize yourself with all op-

erating features and safety rules.

BEVEL SCALE

The bevel scale and indicator show you the degree the saw

table is tilted.

BLADE CLAMP SCREWS

Blade clamp screws are used when changing saw blades.

BLADE TENSION KNOB

Loosen or tighten the blade tension by turning the blade

tension knob.

DROP FOOT

This foot should always be lowered until it just rests on top

of the workpiece to prevent the workpiece from lifting, yet

not so much that the workpiece drags.

DROP FOOT LOCK KNOB

Allows you to raise or lower the drop foot and lock it in

place.

COMBINATION

SQUARE

PHILLIPS SCREWDRIVER

Fig. 3

SLOTTED SCREWDRIVER

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

Commentaires sur ces manuels

Pas de commentaire

Ryobi SC164VS Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à moteur Ryobi SC164VS