Ryobi D46CK Manuel d'utilisateur télécharger pdf (Page 14)



MAINTENANCE

CHUCK REMOVAL

See Figures 10 - 12.

The chuck may be removed and replaced with a new one.

 Unplug the drill.

 Insert a 5/16 in. or larger hex key into the chuck of the

drill and tighten the chuck jaws securely.

 Tap the hex key sharply with a mallet in a clockwise di-

rection. This will loosen the screw in the chuck for easy

removal.

Open the chuck jaws and remove the hex key. Using a

screwdriver, remove the chuck screw by turning it in a

clockwise direction.

NOTE: The chuck screw has left hand threads.

 Insert the hex key into the chuck and tighten the chuck

jaws securely. Tap sharply with a mallet in a counterclock-

wise direction. This will loosen the chuck on the spindle.

It can now be unscrewed by hand.

TO RETIGHTEN A LOOSE CHUCK

The chuck may become loose on the spindle and develop

a wobble. Also, the chuck screw may become loose, caus-

ing the chuck jaws to bind and prevent them from closing.

To tighten:

 Unplug the drill.

 Open the chuck jaws.

 Insert a hex key into the chuck and tighten chuck jaws

securely. Tap the hex key sharply with a mallet in a

clockwise direction. This will tighten the chuck on the

spindle.

 Open the chuck jaws and remove the hex key.

 Tighten the chuck screw.

Fig. 10

Fig. 11

Fig. 12

SCREWDRIVER

HEX KEY

KEYLESS

CHUCK

mALLET

CHUCK

jAWS

mALLET

HEX KEY

1 2 ... 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Ryobi D46CK Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Ryobi D46CK