Ryobi FPR2000 Manuel d'utilisateur télécharger pdf (Page 8)

8 — English

ASSEMBLY

UNPACKING

This product requires assembly.

 Carefully lift the product from the carton and place on a

level work surface.

WARNING:

Do not use this product if any parts on the Loose Parts

List are already assembled to your product when you

unpack it. Parts on this list are not assembled to the

product by the manufacturer and require customer instal-

lation. Use of a product that may have been improperly

assembled could result in serious personal injury.

 Inspect the tool carefully to make sure no breakage or

damage occurred during shipping.

 Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the tool.

 If any parts are damaged or missing, please call

1-800-525-2579 for assistance.

PACKING LIST

Duet™ Power Paint Tool System

Paint roller heads (2)

Handles (2)

Cut-in pad

Paint tubes (2)

Cleaning accessory

Operator’s Manual

WARNING:

If any parts are damaged or missing do not operate this

tool until the parts are replaced. Use of this product

with damaged or missing parts could result in serious

personal injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result

in fluids entering your eyes resulting in possible serious

injury.

WARNING:

Do not connect to power supply until assembly is

complete. Failure to comply could result in accidental

starting and possible serious personal injury.

CONNECTING / DISCONNECTING PAINT

TUBES

See Figure 2, page 11.

Paint travels from the paint can to the pads and/or roller

through the paint tubes.

To connect the paint tubes to the machine:

With the machine unplugged, push the connector on the

end of the paint tube into the quick-connect main outlet

until it clicks. Pull on the tube to be certain it is properly

secured.

If using both outlets, connect a second paint tube to the

quick-connect secondary outlet.

To disconnect the paint tube from the machine:

Hold the tube in your hand and push the release button.

Remove tube to disconnect.

INSTALLING / REPLACING THE PAINT ROLLER

TO THE ROLLER HEAD

See Figure 3, page 11.

Place roller caps in each end of a paint roller.

Align pins in the end of each roller cap to the hole inside

the roller head. Snap into place.

INSTALLING THE PAINT ROLLER OR CUT-IN

PAD TO THE PAINT TUBES

See Figure 4, page 11.

Connect the roller head to the handle before installing to

the paint tube.

To connect roller head to handle:

Insert the collar on the roller head into the hole in the

handle until they “click” together. Pull on the handle to

be certain it is properly secured.

Place the connector on the end of the paint tube into the

quick-connect outlet on the handle. Push until it “clicks”

into place. Pull on the tube to be certain it is properly

secured.

To attach cut-in pad:

Insert the collar on the cut-in pad into the hole in the

handle until they “click” together. Pull on the handle to

be certain it is properly secured.

Place the connector on the end of the paint tube into the

quick-connect outlet on the handle. Push until it clicks

into place. Pull on the tube to be certain it is properly

secured.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Ryobi FPR2000 Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Ryobi FPR2000