Ryobi P716 Manuel de l'opérateur télécharger pdf (Page 6)

6 — English

BATTERY PROTECTION FEATURES

Ryobi lithium-ion batteries are designed with features that

protect the lithium-ion cells and maximize battery life.

TO INSTALL BATTERY PACK

See Figures 1 and 3, page 9.

 Place the switch trigger in the OFF position.

 Place the battery pack in the Xenon Hi-Beam™.

 Make sure the latches on each side of the battery pack

snap in place and that battery pack is secured in the

Xenon Hi-Beam™ before beginning operation.

TO REMOVE BATTERY PACK

See Figures 1 and 3, page 9.

 Place the switch trigger in the OFF position.

 Locate latches on side of battery pack and depress both

sides to release battery pack.

 Remove battery pack from the Xenon Hi-Beam™.

WARNING:

Battery tools are always in operating condition. Therefore,

switch should always be in the OFF position when not in

use or carrying at your side.

NOTE: If the light begins to flash, the battery needs to be

recharged.

THERMOSTAT PROTECTION

Self-contained thermostat will shut off unit if unit becomes

too hot. As soon as unit reaches safe operating temperature

unit can be turned on again.

 Release switch trigger when unit shuts off. Unit will

cool down and thermostat will reset after about 10 mins

rest.

NOTE: If switch trigger is in lock-on position unit will take

several hours to cool. Be sure to release switch trigger

for faster cool down.

SWITCH TRIGGER

See Figure 4, page 9.

To turn the Xenon Hi-Beam™ ON, depress and hold the

switch trigger. To turn it OFF, release the switch trigger.

OPERATION

WARNING:

Do not permit children to use Xenon Hi-Beam™. It is

not a toy and the temperature of the bulb and lens will

become hot after being on for only a short period of time.

This hot temperature can cause serious burn injuries if

touched and can melt some fabrics.

WARNING:

Do not allow familiarity with products to make you care-

less. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Do not use any attachments or accessories not recom-

mended by the manufacturer of this product. The use of

attachments or accessories not recommended can result

in serious personal injury.

APPLICATIONS

You may use this product for the purpose listed below:

 To illuminate any areas requiring additional light

 To illuminate distant objects

This product will accept Ryobi One+ 18 V lithium-ion

battery packs and Ryobi One+ 18 V nickel-cadmium battery

packs.

For complete charging instructions, refer to the Operator’s

Manual for the battery packs and chargers listed in the

General Safety Rules.

WARNING:

The lens gets very hot during use. To reduce the risk of

burns, do not touch hot lens. To reduce the risk of fire,

keep away from combustible materials while in opera-

tion

WARNING:

Do not direct the light beam at persons or animals and

do not stare into the light beam yourself (not even from a

distance). Staring into the light beam may result in serious

injury or vision loss.

CAUTION:

Operate in a well ventilated area. Do not block vents.

Keep them clear to allow proper ventilation.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi P716 Manuel de l'opérateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Chargeurs de batterie Ryobi P716