Ryobi 310r Manuel d'utilisateur télécharger pdf (Page 8)

INSTALLING THE VACUUM TUBES -

(OPTIONAL FOR MODEL 310r)

NOTE: Do not install tubes while unit is running.

1. Align the arrow on the lower vacuum tube with the

arrow on the upper vacuum tube (Fig. 12).

2. Grasping the lower vac tube firmly with both hands,

push the lower vac tube into the upper vac tube. Turn

the lower vac tube clockwise until it snaps into detent

and locks. (The dot on the lower tube aligns with the

dot on the upper tube) when properly assembled.

ASSEMBLY INSTRUCTIONS (Continued)

5. Grasping the upper vac tube firmly with both hands

(Fig. 9), turn the vac tube clockwise (Fig. 10) until

the tabs of the adapter (2) snap into the square

indentations of the upper vac tube (2) (Fig. 11).

NOTE: This assembly requires the use of both

hands because the parts fit together

tightly.

Fig. 9

NOTE: The flat on the upper tube should face the

handle as you install the tube (Fig. 13).

Adapter

Fig. 10

Fig. 11

NOTE: When the tabs lock into the indentations,

the adapter and vacuum tube become a

permanent assembly. The adapter cannot

be removed from the vacuum tube.

Lower Vac Tube

Upper Vac

Tube

Fig. 12

Installing the Vacuum Tubes to the Blower/Vac

NOTE: Do not install tubes while unit is running.

1. Grasp the assembled tube firmly with both hands.

Turn the tube/adapter clockwise as far as possible to

the end of the grooves until it snaps into the detent

and locks (Fig. 13).

NOTE: When the tube is installed correctly, the

flat on the upper tube faces the handle

on the blower/vac (Fig. 13).

Fig. 13

Handle

Flat

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Ryobi 310r Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Ventilateurs Ryobi 310r