Ryobi P421 Manuel d'utilisation et d'entretien télécharger pdf (Page 10)

10 — English

REPLACING THE GUARD

See Figure 1, page 12.

WARNING:

Do not change or loosen guard screw. Failure to heed this

warning may cause the guard to become loose during

operation resulting in serious personal injury.

After extended use, the guard may wear and need replacing.

If you drop the grinder and damage the guard it may also be

necessary for you to replace it.

To replace the guard:

 Remove the battery pack from the grinder.

 Depressspindlelockandrotateclampnutuntilspindle

locks.

 Loosen and remove clamp nut from spindle using the

wrench provided.

 Remove grinding wheel and disc flange.

 Unlocktheguardclaspbypullingtheclasp out,away

from the grinder.

 Openclaspfullyandtwistguardtoreleaseitfromthe

locking groove in the tool housing.

 Removeguard.

 Place the new guard on the shoulder of the bearing cap.

 Rotate guard to the correct position. Refer to Positioning

the Guard earlier in this manual.

NOTE: Be sure the raised ridge on the guard is seated in

the groove on the bearing cap.

 Reassemble disc flange, grinding wheel, and clamp nut.

Refer to Installing Grinding Wheel earlier in this manual.

 Tighten the clamp nut securely with the wrench provided.

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts.

Use of any other part could create a hazard or cause

product damage.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1, along with hearing protection.

Failure to do so could result in objects being thrown into

your eyes and other possible serious injuries.

WARNING:

To avoid serious personal injury, always remove the

battery pack from the tool when cleaning, performing any

maintenance, or when storing the tool.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and can be damaged by their use. Use

clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken or

destroy plastic which could result in serious personal

injury.

NOTE: ILLUSTRATIONS START ON PAGE 12 AFTER

FRENCH AND SPANISH LANGUAGE SECTIONS.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Ryobi P421 Manuel d'utilisation et d'entretien Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi P421