Ryobi RY09055 Manuel d'utilisateur télécharger pdf (Page 12)

10 - English

WARNING:

When servicing, use only identical replacement parts.

Use of any other parts could create a hazard or cause

product damage.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1, along with hearing protection.

Failure to do so could result in objects being thrown into

your eyes and other possible serious injuries.

WARNING:

Before inspecting, cleaning, or servicing the machine,

shut off engine, wait for all moving parts to stop, and

disconnect spark plug wire and move it away from spark

plug. Failure to follow these instructions can result in

serious personal injury or property damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use.

Use clean cloths to remove dirt, dust, lubricant, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating lubricants, etc., come in con-

tact with plastic parts. Chemicals can damage, weaken or

destroy plastic which could result in serious personal

injury.

You can often make adjustments and repairs described here.

For other repairs, have the blower/vacuum serviced by an

authorized service dealer.

 Always point vacuum tube downhill when working on a

hillside.

 To avoid serious injury to the operator or damage to the

unit, do not pick up rocks, metal, broken glass, bottles,

or other similar objects.

 If the vacuum tubes should clog, stop the engine , ensure

impeller blades have stopped spinning, and disconnect

the spark plug wire before cleaning out the obstruction.

 Remove the vacuum tubes and clear the debris from the

blower fan housing. Remove the bag and clear the tube.

A small rod or stick may be required to clear the entire

tube length. Ensure that all debris has been cleared before

reassembling the vacuum tubes.

MAINTENANCE

CLEANING THE AIR FILTER

See Figure 14 - 15.

For proper performance and long life, keep air filter clean.

 Remove the air filter cover by turning the dial counter-

clockwise while gently pulling on the cover.

 Rinse filter with clean water.

 Gently squeeze filter until excess water is removed.

Replace filter.

 Place the air filter cover back on the unit. Turn dial clock-

wise until cover is secure.

CLEANING THE EXHAUST PORT, MUFFLER

AND SPARK ARRESTOR

NOTE: Depending on the type of fuel used, the type and

amount of lubricant used, and/or your operating conditions, the

exhaust port, muffler, and/or spark arrestor screen may be-

come blocked with carbon deposits. If you notice a power

loss with your gas powered tool, you may need to remove

these deposits to restore performance. We highly recom-

mend that only qualified service technicians perform this

service.

The spark arrestor must be cleaned or replaced every 50

hours or yearly to ensure proper performance of your prod-

uct. Spark arrestors may be in different locations depending

on the model purchased. Please contact your nearest service

dealer for the location of the spark arrestor for your model.

WARNING:

Never run the blower without the spark arrestor in place.

Failure to do so could result in a fire that could cause

serious personal injury.

VACUUM BAG

A dirty bag will reduce performance. To clean the bag, turn it

inside out and shake. Wash the bag in soapy water at least

once a year. To obtain a replacement bag, see How to Ob-

tain Replacement Parts on the back page of this manual.

OPERATION

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY09055 Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi RY09055