Ryobi 3000 PSI Manuel d'utilisateur télécharger pdf (Page 10)

ASSEMBLY

ATTACHING THE RESTING FOOT

See Figure 3.

To attach the resting foot to the pressure washer:

n Lift the machine slightly. Slide the resting foot into the

bottom of the spray wand storage tube.

n Push the resting foot into the storage tube until the base

of the machine rests in the grooves on top of the resting

foot.

ASSEMBLING THE SPRAY WAND

See Figure 4.

To attach the assist handle assembly:

n Remove the wing screw from the assist handle assembly

then slide the spray wand assembly onto the assist handle

assembly bracket.

NOTE: The smooth side of the assist handle assembly

should be facing down.

n Position the assist handle on the ribs of the spray wand

in the desired position for the user.

n Secure the assist handle in place by tightening the wing

screw.

To attach the spray wand extension:

n Place the threaded end of the wand extension in the

connector on the end of the spray wand assembly. Push

until it snaps into place.

n Turn the connector clockwise until it stops. This secures

the wand extension in place.

n When not in use, place the assembled spray wand into

the spray wand storage.

CONNECTING HIGH PRESSURE HOSE TO

SPRAY WAND ASSEMBLY

See Figure 5.

n Uncoil the high pressure hose.

n Pull back and hold the spring loaded collar on the high

pressure hose.

n Insert the nozzle on the spray wand handle into the

collar.

n Release the collar and push until it clicks.

n Pull on the hose to be certain it is properly secured.

ATTACHING INJECTION HOSE

See Figure 6.

Before detergent can be used with this machine, the injection

hose must be attached.

n Uncoil the clear injection hose.

n Push the open end of the injection hose securely over

the barbed fitting.

n Lift the chemical bucket and push the injection hose into

the slot on the back of the bucket.

n Replace the bucket in the bucket holder.

Fig. 4

Fig. 5

SPRING

LOADED

COLLAR

PRESSURE

HOSE

SPRAY

WAND

NOZZLE

ASSIST

HANDLE

ASSEMBLY

SPRAY

WAND

EXTENSION

CONNECTOR

RIBS

SPRAY

WAND

RESTING

FOOT

Fig. 3

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Commentaires sur ces manuels

Pas de commentaire

Ryobi 3000 PSI Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Carwash Ryobi 3000 PSI